/trunk/bibliotheque/pear/scripts/pecl.bat |
---|
New file |
0,0 → 1,115 |
@ECHO OFF |
REM ---------------------------------------------------------------------- |
REM PHP version 5 |
REM ---------------------------------------------------------------------- |
REM Copyright (c) 1997-2004 The PHP Group |
REM ---------------------------------------------------------------------- |
REM This source file is subject to version 3.0 of the PHP license, |
REM that is bundled with this package in the file LICENSE, and is |
REM available at through the world-wide-web at |
REM http://www.php.net/license/3_0.txt. |
REM If you did not receive a copy of the PHP license and are unable to |
REM obtain it through the world-wide-web, please send a note to |
REM license@php.net so we can mail you a copy immediately. |
REM ---------------------------------------------------------------------- |
REM Authors: Alexander Merz (alexmerz@php.net) |
REM ---------------------------------------------------------------------- |
REM |
REM Last updated 02/08/2004 ($Id$ is not replaced if the file is binary) |
REM change this lines to match the paths of your system |
REM ------------------- |
REM Test to see if this is a raw pear.bat (uninstalled version) |
SET TMPTMPTMPTMPT=@includ |
SET PMTPMTPMT=%TMPTMPTMPTMPT%e_path@ |
FOR %%x IN ("@include_path@") DO (if %%x=="%PMTPMTPMT%" GOTO :NOTINSTALLED) |
REM Check PEAR global ENV, set them if they do not exist |
IF "%PHP_PEAR_INSTALL_DIR%"=="" SET "PHP_PEAR_INSTALL_DIR=@include_path@" |
IF "%PHP_PEAR_BIN_DIR%"=="" SET "PHP_PEAR_BIN_DIR=@bin_dir@" |
IF "%PHP_PEAR_PHP_BIN%"=="" SET "PHP_PEAR_PHP_BIN=@php_bin@" |
GOTO :INSTALLED |
:NOTINSTALLED |
ECHO WARNING: This is a raw, uninstalled pear.bat |
REM Check to see if we can grab the directory of this file (Windows NT+) |
IF %~n0 == pear ( |
FOR %%x IN (cli\php.exe php.exe) DO (if "%%~$PATH:x" NEQ "" ( |
SET "PHP_PEAR_PHP_BIN=%%~$PATH:x" |
echo Using PHP Executable "%PHP_PEAR_PHP_BIN%" |
"%PHP_PEAR_PHP_BIN%" -v |
GOTO :NEXTTEST |
)) |
GOTO :FAILAUTODETECT |
:NEXTTEST |
IF "%PHP_PEAR_PHP_BIN%" NEQ "" ( |
REM We can use this PHP to run a temporary php file to get the dirname of pear |
echo ^<?php $s=getcwd^(^);chdir^($a=dirname^(__FILE__^).'\\'^);if^(stristr^($a,'\\scripts'^)^)$a=dirname^(dirname^($a^)^).'\\';$f=fopen^($s.'\\~a.a','wb'^);echo$s.'\\~a.a';fwrite^($f,$a^);fclose^($f^);chdir^($s^);?^> > ~~getloc.php |
"%PHP_PEAR_PHP_BIN%" ~~getloc.php |
set /p PHP_PEAR_BIN_DIR=fakeprompt < ~a.a |
DEL ~a.a |
DEL ~~getloc.php |
set "PHP_PEAR_INSTALL_DIR=%PHP_PEAR_BIN_DIR%pear" |
REM Make sure there is a pearcmd.php at our disposal |
IF NOT EXIST %PHP_PEAR_INSTALL_DIR%\pearcmd.php ( |
IF EXIST %PHP_PEAR_INSTALL_DIR%\scripts\pearcmd.php COPY %PHP_PEAR_INSTALL_DIR%\scripts\pearcmd.php %PHP_PEAR_INSTALL_DIR%\pearcmd.php |
IF EXIST pearcmd.php COPY pearcmd.php %PHP_PEAR_INSTALL_DIR%\pearcmd.php |
IF EXIST %~dp0\scripts\pearcmd.php COPY %~dp0\scripts\pearcmd.php %PHP_PEAR_INSTALL_DIR%\pearcmd.php |
) |
) |
GOTO :INSTALLED |
) ELSE ( |
REM Windows Me/98 cannot succeed, so allow the batch to fail |
) |
:FAILAUTODETECT |
echo WARNING: failed to auto-detect pear information |
:INSTALLED |
REM Check Folders and files |
IF NOT EXIST "%PHP_PEAR_INSTALL_DIR%" GOTO PEAR_INSTALL_ERROR |
IF NOT EXIST "%PHP_PEAR_INSTALL_DIR%\pearcmd.php" GOTO PEAR_INSTALL_ERROR2 |
IF NOT EXIST "%PHP_PEAR_BIN_DIR%" GOTO PEAR_BIN_ERROR |
IF NOT EXIST "%PHP_PEAR_PHP_BIN%" GOTO PEAR_PHPBIN_ERROR |
REM launch pearcmd |
GOTO RUN |
:PEAR_INSTALL_ERROR |
ECHO PHP_PEAR_INSTALL_DIR is not set correctly. |
ECHO Please fix it using your environment variable or modify |
ECHO the default value in pear.bat |
ECHO The current value is: |
ECHO %PHP_PEAR_INSTALL_DIR% |
GOTO END |
:PEAR_INSTALL_ERROR2 |
ECHO PHP_PEAR_INSTALL_DIR is not set correctly. |
ECHO pearcmd.php could not be found there. |
ECHO Please fix it using your environment variable or modify |
ECHO the default value in pear.bat |
ECHO The current value is: |
ECHO %PHP_PEAR_INSTALL_DIR% |
GOTO END |
:PEAR_BIN_ERROR |
ECHO PHP_PEAR_BIN_DIR is not set correctly. |
ECHO Please fix it using your environment variable or modify |
ECHO the default value in pear.bat |
ECHO The current value is: |
ECHO %PHP_PEAR_BIN_DIR% |
GOTO END |
:PEAR_PHPBIN_ERROR |
ECHO PHP_PEAR_PHP_BIN is not set correctly. |
ECHO Please fix it using your environment variable or modify |
ECHO the default value in pear.bat |
ECHO The current value is: |
ECHO %PHP_PEAR_PHP_BIN% |
GOTO END |
:RUN |
"%PHP_PEAR_PHP_BIN%" -C -n -d date.timezone=UTC -d output_buffering=1 -d safe_mode=0 -d "include_path='%PHP_PEAR_INSTALL_DIR%'" -d register_argc_argv="On" -d variables_order=EGPCS -f "%PHP_PEAR_INSTALL_DIR%\peclcmd.php" -- %1 %2 %3 %4 %5 %6 %7 %8 %9 |
:END |
@ECHO ON |
/trunk/bibliotheque/pear/scripts/peardev.bat |
---|
New file |
0,0 → 1,115 |
@ECHO OFF |
REM ---------------------------------------------------------------------- |
REM PHP version 5 |
REM ---------------------------------------------------------------------- |
REM Copyright (c) 1997-2004 The PHP Group |
REM ---------------------------------------------------------------------- |
REM This source file is subject to version 3.0 of the PHP license, |
REM that is bundled with this package in the file LICENSE, and is |
REM available at through the world-wide-web at |
REM http://www.php.net/license/3_0.txt. |
REM If you did not receive a copy of the PHP license and are unable to |
REM obtain it through the world-wide-web, please send a note to |
REM license@php.net so we can mail you a copy immediately. |
REM ---------------------------------------------------------------------- |
REM Authors: Alexander Merz (alexmerz@php.net) |
REM ---------------------------------------------------------------------- |
REM |
REM $Id: peardev.bat,v 1.6 2007-09-03 03:00:17 cellog Exp $ |
REM change this lines to match the paths of your system |
REM ------------------- |
REM Test to see if this is a raw pear.bat (uninstalled version) |
SET TMPTMPTMPTMPT=@includ |
SET PMTPMTPMT=%TMPTMPTMPTMPT%e_path@ |
FOR %%x IN ("@include_path@") DO (if %%x=="%PMTPMTPMT%" GOTO :NOTINSTALLED) |
REM Check PEAR global ENV, set them if they do not exist |
IF "%PHP_PEAR_INSTALL_DIR%"=="" SET "PHP_PEAR_INSTALL_DIR=@include_path@" |
IF "%PHP_PEAR_BIN_DIR%"=="" SET "PHP_PEAR_BIN_DIR=@bin_dir@" |
IF "%PHP_PEAR_PHP_BIN%"=="" SET "PHP_PEAR_PHP_BIN=@php_bin@" |
GOTO :INSTALLED |
:NOTINSTALLED |
ECHO WARNING: This is a raw, uninstalled pear.bat |
REM Check to see if we can grab the directory of this file (Windows NT+) |
IF %~n0 == pear ( |
FOR %%x IN (cli\php.exe php.exe) DO (if "%%~$PATH:x" NEQ "" ( |
SET "PHP_PEAR_PHP_BIN=%%~$PATH:x" |
echo Using PHP Executable "%PHP_PEAR_PHP_BIN%" |
"%PHP_PEAR_PHP_BIN%" -v |
GOTO :NEXTTEST |
)) |
GOTO :FAILAUTODETECT |
:NEXTTEST |
IF "%PHP_PEAR_PHP_BIN%" NEQ "" ( |
REM We can use this PHP to run a temporary php file to get the dirname of pear |
echo ^<?php $s=getcwd^(^);chdir^($a=dirname^(__FILE__^).'\\'^);if^(stristr^($a,'\\scripts'^)^)$a=dirname^(dirname^($a^)^).'\\';$f=fopen^($s.'\\~a.a','wb'^);echo$s.'\\~a.a';fwrite^($f,$a^);fclose^($f^);chdir^($s^);?^> > ~~getloc.php |
"%PHP_PEAR_PHP_BIN%" ~~getloc.php |
set /p PHP_PEAR_BIN_DIR=fakeprompt < ~a.a |
DEL ~a.a |
DEL ~~getloc.php |
set "PHP_PEAR_INSTALL_DIR=%PHP_PEAR_BIN_DIR%pear" |
REM Make sure there is a pearcmd.php at our disposal |
IF NOT EXIST %PHP_PEAR_INSTALL_DIR%\pearcmd.php ( |
IF EXIST %PHP_PEAR_INSTALL_DIR%\scripts\pearcmd.php COPY %PHP_PEAR_INSTALL_DIR%\scripts\pearcmd.php %PHP_PEAR_INSTALL_DIR%\pearcmd.php |
IF EXIST pearcmd.php COPY pearcmd.php %PHP_PEAR_INSTALL_DIR%\pearcmd.php |
IF EXIST %~dp0\scripts\pearcmd.php COPY %~dp0\scripts\pearcmd.php %PHP_PEAR_INSTALL_DIR%\pearcmd.php |
) |
) |
GOTO :INSTALLED |
) ELSE ( |
REM Windows Me/98 cannot succeed, so allow the batch to fail |
) |
:FAILAUTODETECT |
echo WARNING: failed to auto-detect pear information |
:INSTALLED |
REM Check Folders and files |
IF NOT EXIST "%PHP_PEAR_INSTALL_DIR%" GOTO PEAR_INSTALL_ERROR |
IF NOT EXIST "%PHP_PEAR_INSTALL_DIR%\pearcmd.php" GOTO PEAR_INSTALL_ERROR2 |
IF NOT EXIST "%PHP_PEAR_BIN_DIR%" GOTO PEAR_BIN_ERROR |
IF NOT EXIST "%PHP_PEAR_PHP_BIN%" GOTO PEAR_PHPBIN_ERROR |
REM launch pearcmd |
GOTO RUN |
:PEAR_INSTALL_ERROR |
ECHO PHP_PEAR_INSTALL_DIR is not set correctly. |
ECHO Please fix it using your environment variable or modify |
ECHO the default value in pear.bat |
ECHO The current value is: |
ECHO %PHP_PEAR_INSTALL_DIR% |
GOTO END |
:PEAR_INSTALL_ERROR2 |
ECHO PHP_PEAR_INSTALL_DIR is not set correctly. |
ECHO pearcmd.php could not be found there. |
ECHO Please fix it using your environment variable or modify |
ECHO the default value in pear.bat |
ECHO The current value is: |
ECHO %PHP_PEAR_INSTALL_DIR% |
GOTO END |
:PEAR_BIN_ERROR |
ECHO PHP_PEAR_BIN_DIR is not set correctly. |
ECHO Please fix it using your environment variable or modify |
ECHO the default value in pear.bat |
ECHO The current value is: |
ECHO %PHP_PEAR_BIN_DIR% |
GOTO END |
:PEAR_PHPBIN_ERROR |
ECHO PHP_PEAR_PHP_BIN is not set correctly. |
ECHO Please fix it using your environment variable or modify |
ECHO the default value in pear.bat |
ECHO The current value is: |
ECHO %PHP_PEAR_PHP_BIN% |
GOTO END |
:RUN |
"%PHP_PEAR_PHP_BIN%" -C -d date.timezone=UTC -d memory_limit="-1" -d safe_mode=0 -d register_argc_argv="On" -d auto_prepend_file="" -d auto_append_file="" -d variables_order=EGPCS -d open_basedir="" -d output_buffering=1 -d "include_path='%PHP_PEAR_INSTALL_DIR%'" -f "%PHP_PEAR_INSTALL_DIR%\pearcmd.php" -- %1 %2 %3 %4 %5 %6 %7 %8 %9 |
:END |
@ECHO ON |
/trunk/bibliotheque/pear/scripts/pear.bat |
---|
New file |
0,0 → 1,111 |
@ECHO OFF |
REM ---------------------------------------------------------------------- |
REM PHP version 5 |
REM ---------------------------------------------------------------------- |
REM Copyright (c) 1997-2010 The Authors |
REM ---------------------------------------------------------------------- |
REM http://opensource.org/licenses/bsd-license.php New BSD License |
REM ---------------------------------------------------------------------- |
REM Authors: Alexander Merz (alexmerz@php.net) |
REM ---------------------------------------------------------------------- |
REM |
REM Last updated 12/29/2004 ($Id$ is not replaced if the file is binary) |
REM change this lines to match the paths of your system |
REM ------------------- |
REM Test to see if this is a raw pear.bat (uninstalled version) |
SET TMPTMPTMPTMPT=@includ |
SET PMTPMTPMT=%TMPTMPTMPTMPT%e_path@ |
FOR %%x IN ("@include_path@") DO (if %%x=="%PMTPMTPMT%" GOTO :NOTINSTALLED) |
REM Check PEAR global ENV, set them if they do not exist |
IF "%PHP_PEAR_INSTALL_DIR%"=="" SET "PHP_PEAR_INSTALL_DIR=@include_path@" |
IF "%PHP_PEAR_BIN_DIR%"=="" SET "PHP_PEAR_BIN_DIR=@bin_dir@" |
IF "%PHP_PEAR_PHP_BIN%"=="" SET "PHP_PEAR_PHP_BIN=@php_bin@" |
GOTO :INSTALLED |
:NOTINSTALLED |
ECHO WARNING: This is a raw, uninstalled pear.bat |
REM Check to see if we can grab the directory of this file (Windows NT+) |
IF %~n0 == pear ( |
FOR %%x IN (cli\php.exe php.exe) DO (if "%%~$PATH:x" NEQ "" ( |
SET "PHP_PEAR_PHP_BIN=%%~$PATH:x" |
echo Using PHP Executable "%PHP_PEAR_PHP_BIN%" |
"%PHP_PEAR_PHP_BIN%" -v |
GOTO :NEXTTEST |
)) |
GOTO :FAILAUTODETECT |
:NEXTTEST |
IF "%PHP_PEAR_PHP_BIN%" NEQ "" ( |
REM We can use this PHP to run a temporary php file to get the dirname of pear |
echo ^<?php $s=getcwd^(^);chdir^($a=dirname^(__FILE__^).'\\'^);if^(stristr^($a,'\\scripts'^)^)$a=dirname^(dirname^($a^)^).'\\';$f=fopen^($s.'\\~a.a','wb'^);echo$s.'\\~a.a';fwrite^($f,$a^);fclose^($f^);chdir^($s^);?^> > ~~getloc.php |
"%PHP_PEAR_PHP_BIN%" ~~getloc.php |
set /p PHP_PEAR_BIN_DIR=fakeprompt < ~a.a |
DEL ~a.a |
DEL ~~getloc.php |
set "PHP_PEAR_INSTALL_DIR=%PHP_PEAR_BIN_DIR%pear" |
REM Make sure there is a pearcmd.php at our disposal |
IF NOT EXIST %PHP_PEAR_INSTALL_DIR%\pearcmd.php ( |
IF EXIST %PHP_PEAR_INSTALL_DIR%\scripts\pearcmd.php COPY %PHP_PEAR_INSTALL_DIR%\scripts\pearcmd.php %PHP_PEAR_INSTALL_DIR%\pearcmd.php |
IF EXIST pearcmd.php COPY pearcmd.php %PHP_PEAR_INSTALL_DIR%\pearcmd.php |
IF EXIST %~dp0\scripts\pearcmd.php COPY %~dp0\scripts\pearcmd.php %PHP_PEAR_INSTALL_DIR%\pearcmd.php |
) |
) |
GOTO :INSTALLED |
) ELSE ( |
REM Windows Me/98 cannot succeed, so allow the batch to fail |
) |
:FAILAUTODETECT |
echo WARNING: failed to auto-detect pear information |
:INSTALLED |
REM Check Folders and files |
IF NOT EXIST "%PHP_PEAR_INSTALL_DIR%" GOTO PEAR_INSTALL_ERROR |
IF NOT EXIST "%PHP_PEAR_INSTALL_DIR%\pearcmd.php" GOTO PEAR_INSTALL_ERROR2 |
IF NOT EXIST "%PHP_PEAR_BIN_DIR%" GOTO PEAR_BIN_ERROR |
IF NOT EXIST "%PHP_PEAR_PHP_BIN%" GOTO PEAR_PHPBIN_ERROR |
REM launch pearcmd |
GOTO RUN |
:PEAR_INSTALL_ERROR |
ECHO PHP_PEAR_INSTALL_DIR is not set correctly. |
ECHO Please fix it using your environment variable or modify |
ECHO the default value in pear.bat |
ECHO The current value is: |
ECHO %PHP_PEAR_INSTALL_DIR% |
GOTO END |
:PEAR_INSTALL_ERROR2 |
ECHO PHP_PEAR_INSTALL_DIR is not set correctly. |
ECHO pearcmd.php could not be found there. |
ECHO Please fix it using your environment variable or modify |
ECHO the default value in pear.bat |
ECHO The current value is: |
ECHO %PHP_PEAR_INSTALL_DIR% |
GOTO END |
:PEAR_BIN_ERROR |
ECHO PHP_PEAR_BIN_DIR is not set correctly. |
ECHO Please fix it using your environment variable or modify |
ECHO the default value in pear.bat |
ECHO The current value is: |
ECHO %PHP_PEAR_BIN_DIR% |
GOTO END |
:PEAR_PHPBIN_ERROR |
ECHO PHP_PEAR_PHP_BIN is not set correctly. |
ECHO Please fix it using your environment variable or modify |
ECHO the default value in pear.bat |
ECHO The current value is: |
ECHO %PHP_PEAR_PHP_BIN% |
GOTO END |
:RUN |
"%PHP_PEAR_PHP_BIN%" -C -d date.timezone=UTC -d output_buffering=1 -d safe_mode=0 -d open_basedir="" -d auto_prepend_file="" -d auto_append_file="" -d variables_order=EGPCS -d register_argc_argv="On" -d "include_path='%PHP_PEAR_INSTALL_DIR%'" -f "%PHP_PEAR_INSTALL_DIR%\pearcmd.php" -- %1 %2 %3 %4 %5 %6 %7 %8 %9 |
:END |
@ECHO ON |
Property changes: |
Added: svn:executable |
+* |
\ No newline at end of property |
/trunk/bibliotheque/pear/scripts/pecl.sh |
---|
New file |
0,0 → 1,28 |
#!/bin/sh |
# first find which PHP binary to use |
if test "x$PHP_PEAR_PHP_BIN" != "x"; then |
PHP="$PHP_PEAR_PHP_BIN" |
else |
if test "@php_bin@" = '@'php_bin'@'; then |
PHP=php |
else |
PHP="@php_bin@" |
fi |
fi |
# then look for the right pear include dir |
if test "x$PHP_PEAR_INSTALL_DIR" != "x"; then |
INCDIR=$PHP_PEAR_INSTALL_DIR |
INCARG="-d include_path=$PHP_PEAR_INSTALL_DIR" |
else |
if test "@php_dir@" = '@'php_dir'@'; then |
INCDIR=`dirname $0` |
INCARG="" |
else |
INCDIR="@php_dir@" |
INCARG="-d include_path=@php_dir@" |
fi |
fi |
exec $PHP -C -n -q $INCARG -d date.timezone=UTC -d output_buffering=1 -d variables_order=EGPCS -d safe_mode=0 -d register_argc_argv="On" $INCDIR/peclcmd.php "$@" |
Property changes: |
Added: svn:executable |
+* |
\ No newline at end of property |
/trunk/bibliotheque/pear/scripts/peclcmd.php |
---|
New file |
0,0 → 1,42 |
<?php |
/** |
* PEAR, the PHP Extension and Application Repository |
* |
* Command line interface |
* |
* PHP versions 4 and 5 |
* |
* @category pear |
* @package PEAR |
* @author Stig Bakken <ssb@php.net> |
* @author Tomas V.V.Cox <cox@idecnet.com> |
* @copyright 1997-2009 The Authors |
* @license http://opensource.org/licenses/bsd-license.php New BSD License |
* @link http://pear.php.net/package/PEAR |
*/ |
/** |
* @nodep Gtk |
*/ |
//the space is needed for windows include paths with trailing backslash |
// http://pear.php.net/bugs/bug.php?id=19482 |
if ('@include_path@ ' != '@'.'include_path'.'@ ') { |
ini_set('include_path', trim('@include_path@ '). PATH_SEPARATOR . get_include_path()); |
$raw = false; |
} else { |
// this is a raw, uninstalled pear, either a cvs checkout, or php distro |
$raw = true; |
} |
define('PEAR_RUNTYPE', 'pecl'); |
require_once 'pearcmd.php'; |
/* |
* Local variables: |
* tab-width: 4 |
* c-basic-offset: 4 |
* indent-tabs-mode: nil |
* mode: php |
* End: |
*/ |
// vim600:syn=php |
?> |
/trunk/bibliotheque/pear/scripts/peardev.sh |
---|
New file |
0,0 → 1,28 |
#!/bin/sh |
# first find which PHP binary to use |
if test "x$PHP_PEAR_PHP_BIN" != "x"; then |
PHP="$PHP_PEAR_PHP_BIN" |
else |
if test "@php_bin@" = '@'php_bin'@'; then |
PHP=php |
else |
PHP="@php_bin@" |
fi |
fi |
# then look for the right pear include dir |
if test "x$PHP_PEAR_INSTALL_DIR" != "x"; then |
INCDIR=$PHP_PEAR_INSTALL_DIR |
INCARG="-d include_path=$PHP_PEAR_INSTALL_DIR" |
else |
if test "@php_dir@" = '@'php_dir'@'; then |
INCDIR=`dirname $0` |
INCARG="" |
else |
INCDIR="@php_dir@" |
INCARG="-d include_path=@php_dir@" |
fi |
fi |
exec $PHP -d date.timezone=UTC -d memory_limit="-1" -C -q $INCARG -d output_buffering=1 -d open_basedir="" -d safe_mode=0 -d register_argc_argv="On" -d auto_prepend_file="" -d variables_order=EGPCS -d auto_append_file="" $INCDIR/pearcmd.php "$@" |
Property changes: |
Added: svn:executable |
+* |
\ No newline at end of property |
/trunk/bibliotheque/pear/scripts/pear.sh |
---|
New file |
0,0 → 1,28 |
#!/bin/sh |
# first find which PHP binary to use |
if test "x$PHP_PEAR_PHP_BIN" != "x"; then |
PHP="$PHP_PEAR_PHP_BIN" |
else |
if test "@php_bin@" = '@'php_bin'@'; then |
PHP=php |
else |
PHP="@php_bin@" |
fi |
fi |
# then look for the right pear include dir |
if test "x$PHP_PEAR_INSTALL_DIR" != "x"; then |
INCDIR=$PHP_PEAR_INSTALL_DIR |
INCARG="-d include_path=$PHP_PEAR_INSTALL_DIR" |
else |
if test "@php_dir@" = '@'php_dir'@'; then |
INCDIR=`dirname $0` |
INCARG="" |
else |
INCDIR="@php_dir@" |
INCARG="-d include_path=@php_dir@" |
fi |
fi |
exec $PHP -C -q $INCARG -d date.timezone=UTC -d output_buffering=1 -d variables_order=EGPCS -d open_basedir="" -d safe_mode=0 -d register_argc_argv="On" -d auto_prepend_file="" -d auto_append_file="" $INCDIR/pearcmd.php "$@" |
Property changes: |
Added: svn:executable |
+* |
\ No newline at end of property |
/trunk/bibliotheque/pear/scripts/pearcmd.php |
---|
New file |
0,0 → 1,497 |
<?php |
/** |
* PEAR, the PHP Extension and Application Repository |
* |
* Command line interface |
* |
* PHP versions 4 and 5 |
* |
* @category pear |
* @package PEAR |
* @author Stig Bakken <ssb@php.net> |
* @author Tomas V.V.Cox <cox@idecnet.com> |
* @copyright 1997-2009 The Authors |
* @license http://opensource.org/licenses/bsd-license.php New BSD License |
* @link http://pear.php.net/package/PEAR |
*/ |
@ob_end_clean(); |
if (!defined('PEAR_RUNTYPE')) { |
// this is defined in peclcmd.php as 'pecl' |
define('PEAR_RUNTYPE', 'pear'); |
} |
define('PEAR_IGNORE_BACKTRACE', 1); |
/** |
* @nodep Gtk |
*/ |
//the space is needed for windows include paths with trailing backslash |
// http://pear.php.net/bugs/bug.php?id=19482 |
if ('@include_path@ ' != '@'.'include_path'.'@ ') { |
ini_set('include_path', trim('@include_path@ '). PATH_SEPARATOR . get_include_path()); |
$raw = false; |
} else { |
// this is a raw, uninstalled pear, either a cvs checkout, or php distro |
$raw = true; |
} |
@ini_set('allow_url_fopen', true); |
@set_time_limit(0); |
ob_implicit_flush(true); |
@ini_set('track_errors', true); |
@ini_set('html_errors', false); |
$_PEAR_PHPDIR = '#$%^&*'; |
set_error_handler('error_handler'); |
$pear_package_version = "@pear_version@"; |
require_once 'PEAR.php'; |
require_once 'PEAR/Frontend.php'; |
require_once 'PEAR/Config.php'; |
require_once 'PEAR/Command.php'; |
require_once 'Console/Getopt.php'; |
PEAR_Command::setFrontendType('CLI'); |
$all_commands = PEAR_Command::getCommands(); |
// remove this next part when we stop supporting that crap-ass PHP 4.2 |
if (!isset($_SERVER['argv']) && !isset($argv) && !isset($HTTP_SERVER_VARS['argv'])) { |
echo 'ERROR: either use the CLI php executable, ' . |
'or set register_argc_argv=On in php.ini'; |
exit(1); |
} |
$argv = Console_Getopt::readPHPArgv(); |
// fix CGI sapi oddity - the -- in pear.bat/pear is not removed |
if (php_sapi_name() != 'cli' && isset($argv[1]) && $argv[1] == '--') { |
unset($argv[1]); |
$argv = array_values($argv); |
} |
$progname = PEAR_RUNTYPE; |
array_shift($argv); |
$options = Console_Getopt::getopt2($argv, "c:C:d:D:Gh?sSqu:vV"); |
if (PEAR::isError($options)) { |
usage($options); |
} |
$opts = $options[0]; |
$fetype = 'CLI'; |
if ($progname == 'gpear' || $progname == 'pear-gtk') { |
$fetype = 'Gtk2'; |
} else { |
foreach ($opts as $opt) { |
if ($opt[0] == 'G') { |
$fetype = 'Gtk2'; |
} |
} |
} |
$pear_user_config = ''; |
$pear_system_config = ''; |
$store_user_config = false; |
$store_system_config = false; |
$verbose = 1; |
foreach ($opts as $opt) { |
switch ($opt[0]) { |
case 'c': |
$pear_user_config = $opt[1]; |
break; |
case 'C': |
$pear_system_config = $opt[1]; |
break; |
} |
} |
PEAR_Command::setFrontendType($fetype); |
$ui = &PEAR_Command::getFrontendObject(); |
$config = &PEAR_Config::singleton($pear_user_config, $pear_system_config); |
if (PEAR::isError($config)) { |
$_file = ''; |
if ($pear_user_config !== false) { |
$_file .= $pear_user_config; |
} |
if ($pear_system_config !== false) { |
$_file .= '/' . $pear_system_config; |
} |
if ($_file == '/') { |
$_file = 'The default config file'; |
} |
$config->getMessage(); |
$ui->outputData("ERROR: $_file is not a valid config file or is corrupted."); |
// We stop, we have no idea where we are :) |
exit(1); |
} |
// this is used in the error handler to retrieve a relative path |
$_PEAR_PHPDIR = $config->get('php_dir'); |
$ui->setConfig($config); |
PEAR::setErrorHandling(PEAR_ERROR_CALLBACK, array($ui, "displayFatalError")); |
$verbose = $config->get("verbose"); |
$cmdopts = array(); |
if ($raw) { |
if (!$config->isDefinedLayer('user') && !$config->isDefinedLayer('system')) { |
$found = false; |
foreach ($opts as $opt) { |
if ($opt[0] == 'd' || $opt[0] == 'D') { |
// the user knows what they are doing, and are setting config values |
$found = true; |
} |
} |
if (!$found) { |
// no prior runs, try to install PEAR |
$parent = dirname(__FILE__); |
if (strpos($parent, 'scripts')) { |
$grandparent = dirname($parent); |
$packagexml = $grandparent . DIRECTORY_SEPARATOR . 'package2.xml'; |
$pearbase = $grandparent; |
} else { |
$packagexml = $parent . DIRECTORY_SEPARATOR . 'package2.xml'; |
$pearbase = $parent; |
} |
if (file_exists($packagexml)) { |
$options[1] = array( |
'install', |
$packagexml |
); |
$config->set('php_dir', $pearbase . DIRECTORY_SEPARATOR . 'php'); |
$config->set('data_dir', $pearbase . DIRECTORY_SEPARATOR . 'data'); |
$config->set('doc_dir', $pearbase . DIRECTORY_SEPARATOR . 'docs'); |
$config->set('test_dir', $pearbase . DIRECTORY_SEPARATOR . 'tests'); |
$config->set( |
'ext_dir', |
$pearbase . DIRECTORY_SEPARATOR . 'extensions' |
); |
$config->set('bin_dir', $pearbase); |
$config->mergeConfigFile($pearbase . 'pear.ini', false); |
$config->store(); |
$config->set('auto_discover', 1); |
} |
} |
} |
} |
foreach ($opts as $opt) { |
$param = !empty($opt[1]) ? $opt[1] : true; |
switch ($opt[0]) { |
case 'd': |
if ($param === true) { |
die( |
'Invalid usage of "-d" option, expected -d config_value=value, ' . |
'received "-d"' . "\n" |
); |
} |
$possible = explode('=', $param); |
if (count($possible) != 2) { |
die( |
'Invalid usage of "-d" option, expected ' . |
'-d config_value=value, received "' . $param . '"' . "\n" |
); |
} |
list($key, $value) = explode('=', $param); |
$config->set($key, $value, 'user'); |
break; |
case 'D': |
if ($param === true) { |
die( |
'Invalid usage of "-d" option, expected ' . |
'-d config_value=value, received "-d"' . "\n" |
); |
} |
$possible = explode('=', $param); |
if (count($possible) != 2) { |
die( |
'Invalid usage of "-d" option, expected ' . |
'-d config_value=value, received "' . $param . '"' . "\n" |
); |
} |
list($key, $value) = explode('=', $param); |
$config->set($key, $value, 'system'); |
break; |
case 's': |
$store_user_config = true; |
break; |
case 'S': |
$store_system_config = true; |
break; |
case 'u': |
$config->remove($param, 'user'); |
break; |
case 'v': |
$config->set('verbose', $config->get('verbose') + 1); |
break; |
case 'q': |
$config->set('verbose', $config->get('verbose') - 1); |
break; |
case 'V': |
usage(null, 'version'); |
case 'c': |
case 'C': |
break; |
default: |
// all non pear params goes to the command |
$cmdopts[$opt[0]] = $param; |
break; |
} |
} |
if ($store_system_config) { |
$config->store('system'); |
} |
if ($store_user_config) { |
$config->store('user'); |
} |
$command = (isset($options[1][0])) ? $options[1][0] : null; |
if (empty($command) && ($store_user_config || $store_system_config)) { |
exit; |
} |
if ($fetype == 'Gtk2') { |
if (!$config->validConfiguration()) { |
PEAR::raiseError( |
"CRITICAL ERROR: no existing valid configuration files found in " . |
"files '$pear_user_config' or '$pear_system_config', " . |
"please copy an existing configuration file to one of these " . |
"locations, or use the -c and -s options to create one" |
); |
} |
Gtk::main(); |
} else { |
do { |
if ($command == 'help') { |
usage(null, isset($options[1][1]) ? $options[1][1] : null); |
} |
if (!$config->validConfiguration()) { |
PEAR::raiseError( |
"CRITICAL ERROR: no existing valid configuration files found " . |
"in files '$pear_user_config' or '$pear_system_config', " . |
"please copy an existing configuration file to one of " . |
"these locations, or use the -c and -s options to create one" |
); |
} |
PEAR::pushErrorHandling(PEAR_ERROR_RETURN); |
$cmd = PEAR_Command::factory($command, $config); |
PEAR::popErrorHandling(); |
if (PEAR::isError($cmd)) { |
usage(null, isset($options[1][0]) ? $options[1][0] : null); |
} |
$short_args = $long_args = null; |
PEAR_Command::getGetoptArgs($command, $short_args, $long_args); |
array_shift($options[1]); |
$tmp = Console_Getopt::getopt2($options[1], $short_args, $long_args); |
if (PEAR::isError($tmp)) { |
break; |
} |
list($tmpopt, $params) = $tmp; |
$opts = array(); |
foreach ($tmpopt as $foo => $tmp2) { |
list($opt, $value) = $tmp2; |
if ($value === null) { |
$value = true; // options without args |
} |
if (strlen($opt) == 1) { |
$cmdoptions = $cmd->getOptions($command); |
foreach ($cmdoptions as $o => $d) { |
if (isset($d['shortopt']) && $d['shortopt'] == $opt) { |
$opts[$o] = $value; |
} |
} |
} else { |
if (substr($opt, 0, 2) == '--') { |
$opts[substr($opt, 2)] = $value; |
} |
} |
} |
$ok = $cmd->run($command, $opts, $params); |
if ($ok === false) { |
PEAR::raiseError("unknown command `$command'"); |
} |
if (PEAR::isError($ok)) { |
PEAR::setErrorHandling( |
PEAR_ERROR_CALLBACK, array($ui, "displayFatalError") |
); |
PEAR::raiseError($ok); |
} |
} while (false); |
} |
// {{{ usage() |
/** |
* Display usage information |
* |
* @param mixed $error Optional error message |
* @param mixed $helpsubject Optional subject/command to display help for |
* |
* @return void |
*/ |
function usage($error = null, $helpsubject = null) |
{ |
global $progname, $all_commands; |
$stdout = fopen('php://stdout', 'w'); |
if (PEAR::isError($error)) { |
fputs($stdout, $error->getMessage() . "\n"); |
} elseif ($error !== null) { |
fputs($stdout, "$error\n"); |
} |
if ($helpsubject != null) { |
$put = cmdHelp($helpsubject); |
} else { |
$put = "Commands:\n"; |
$maxlen = max(array_map("strlen", $all_commands)); |
$formatstr = "%-{$maxlen}s %s\n"; |
ksort($all_commands); |
foreach ($all_commands as $cmd => $class) { |
$put .= sprintf($formatstr, $cmd, PEAR_Command::getDescription($cmd)); |
} |
$put .= |
"Usage: $progname [options] command [command-options] <parameters>\n". |
"Type \"$progname help options\" to list all options.\n". |
"Type \"$progname help shortcuts\" to list all command shortcuts.\n". |
"Type \"$progname help version\" or ". |
"\"$progname version\" to list version information.\n". |
"Type \"$progname help <command>\" to get the help ". |
"for the specified command."; |
} |
fputs($stdout, "$put\n"); |
fclose($stdout); |
if ($error === null) { |
exit(0); |
} |
exit(1); |
} |
/** |
* Return help string for specified command |
* |
* @param string $command Command to return help for |
* |
* @return void |
*/ |
function cmdHelp($command) |
{ |
global $progname, $all_commands, $config; |
if ($command == "options") { |
return |
"Options:\n". |
" -v increase verbosity level (default 1)\n". |
" -q be quiet, decrease verbosity level\n". |
" -c file find user configuration in `file'\n". |
" -C file find system configuration in `file'\n". |
" -d foo=bar set user config variable `foo' to `bar'\n". |
" -D foo=bar set system config variable `foo' to `bar'\n". |
" -G start in graphical (Gtk) mode\n". |
" -s store user configuration\n". |
" -S store system configuration\n". |
" -u foo unset `foo' in the user configuration\n". |
" -h, -? display help/usage (this message)\n". |
" -V version information\n"; |
} elseif ($command == "shortcuts") { |
$sc = PEAR_Command::getShortcuts(); |
$ret = "Shortcuts:\n"; |
foreach ($sc as $s => $c) { |
$ret .= sprintf(" %-8s %s\n", $s, $c); |
} |
return $ret; |
} elseif ($command == "version") { |
return "PEAR Version: ".$GLOBALS['pear_package_version']. |
"\nPHP Version: ".phpversion(). |
"\nZend Engine Version: ".zend_version(). |
"\nRunning on: ".php_uname(); |
} elseif ($help = PEAR_Command::getHelp($command)) { |
if (is_string($help)) { |
return "$progname $command [options] $help\n"; |
} |
if ($help[1] === null) { |
return "$progname $command $help[0]"; |
} |
return "$progname $command [options] $help[0]\n$help[1]"; |
} |
return "Command '$command' is not valid, try '$progname help'"; |
} |
// }}} |
/** |
* error_handler |
* |
* @param mixed $errno Error number |
* @param mixed $errmsg Message |
* @param mixed $file Filename |
* @param mixed $line Line number |
* @param mixed $vars Variables |
* |
* @access public |
* @return boolean |
*/ |
function error_handler($errno, $errmsg, $file, $line, $vars) |
{ |
if ($errno & E_STRICT |
|| $errno & E_DEPRECATED |
|| !error_reporting() |
) { |
if ($errno & E_STRICT) { |
return; // E_STRICT |
} |
if ($errno & E_DEPRECATED) { |
return; // E_DEPRECATED |
} |
if (!error_reporting() && isset($GLOBALS['config']) && $GLOBALS['config']->get('verbose') < 4) { |
return false; // @silenced error, show all if debug is high enough |
} |
} |
$errortype = array ( |
E_DEPRECATED => 'Deprecated Warning', |
E_ERROR => "Error", |
E_WARNING => "Warning", |
E_PARSE => "Parsing Error", |
E_STRICT => 'Strict Warning', |
E_NOTICE => "Notice", |
E_CORE_ERROR => "Core Error", |
E_CORE_WARNING => "Core Warning", |
E_COMPILE_ERROR => "Compile Error", |
E_COMPILE_WARNING => "Compile Warning", |
E_USER_ERROR => "User Error", |
E_USER_WARNING => "User Warning", |
E_USER_NOTICE => "User Notice" |
); |
$prefix = $errortype[$errno]; |
global $_PEAR_PHPDIR; |
if (stristr($file, $_PEAR_PHPDIR)) { |
$file = substr($file, strlen($_PEAR_PHPDIR) + 1); |
} else { |
$file = basename($file); |
} |
print "\n$prefix: $errmsg in $file on line $line\n"; |
return false; |
} |
/* |
* Local variables: |
* tab-width: 4 |
* c-basic-offset: 4 |
* indent-tabs-mode: nil |
* mode: php |
* End: |
*/ |
// vim600:syn=php |