Rev 609 | Blame | Compare with Previous | Last modification | View Log | RSS feed
<erreur_MySQL><NEW> {{{A template problem}}}<NEW> When SPIP faces an error in its communication with MySQL database, it displays on the screen the failed query as well as the error message returned by the database (in red).<NEW> The problem could result:- either from an error in the definition of your template, if you are in the process of modifying your site;- or from a failure in the database.<NEW> For instance, a message of the sort <font color='red'><b>_ <code>> Unknown column 'articles.chapi' in 'where clause'</code></b></font> indicates that the loop calls a selection criteria (<code>chapi</code>) which is not accounted for.От друга страна, едно съобщение от типа <font color='red'><b>_ <code>> Файлът не може да бъде отворен: 'spip_articles.MYD'</code></b></font> показва сериозен проблем в базата данни MySQL: в такъв случай трябва да се свържете с доставчика си, за ва одобри инсталацията и/или да поправи базата Ви данни.Ако имате нова версия на MySQL (поне 3.23.14), можете също така да опитате <a href="admin_repair.php3" target="_blank">автоматична поправка на базата данни</a>.</erreur_mysql><ftp_auth>{{{Удостоверяване чрез FTP}}}Някои от възможностите на СПИП имат пряко влияние върху структурата и съдържанието на базата данни (най-вече: актуализации, архивиране и възстановяване на базата данни и др.). За тези много особени свойства е създадена процедура за FTP идентификация, за да се ограничи тяхното използване до ограничен брой потребители, които имат достъп до сървъра на сайта посредством FTP (по-общо, ако един сайт позволява няколко администратори на СПИП, достъпът до FTP е ограничен до главният уеб администратор).<NEW> To be able to use these features, you have to simultaneously:<NEW> <UL><LI>connect to the web with your usual browser; when you launch the action, SPIP specifies a name of the format «admin_{xxxxx}», that you must write down;</LI><LI>свържете се с Вашия сървър на сайта посредством FTP; в папката <TT>/ecrire/data</TT>, създайте файл (или празна директория) и я наречете «admin_{xxxxx}»;</LI><LI>След като създадете файла или директорията, върнете се към интернет навигатора си и презаредете страницата, която заключава идентификацията на FTP и ускорява действитето. </LI><NEW> </UL></ftp_auth><NEW> <artauteurs><NEW> {{{Authors}}}<NEW> When an administrator or an editor creates an article, he is considered automatically the author of the article. In several cases the authors should be changed (i.e. when a third party story is added to the site, when a story shouldn't be signed, or when it is edited by several users...)<NEW> - {{Adding an author}}<NEW> A drop-down menu showing the list of all the site editors allows selecting and adding a new author.<NEW> {If more than 50 editors contribute to the site, it becomes awkward to display them in a drop-down menu (it slows the loading dramatically); in this case, the drop-down menu is replaced by a search box: you enter the name of the author you wish to add and click on «search». If the search returns more than one author, the system will let you select the one you want.}<NEW> - {{Removing an author}}<NEW> Next to each author of the article, the link «Remove the author» allows you to simply remove this author.<NEW> {It is only as the author of this particular article that the editor is removed; he obviously remains present in the list of the site editors.}<NEW> - {{Replacing an author by another}}<NEW> This can be achieved in two steps: simply add the new author and remove the first one (see above).<NEW> - It must be stressed finally that the administrators have more power over this authors list than the editors. Particularly, the editors cannot remove themselves from an article. If an editor wishes to publish an anonymous article (without author), he must ask an administrator to perform the operation.<NEW> </artauteurs><NEW> <artchap><NEW> {{{The deck}}}<NEW> In the publishing jargon, the {deck} is the short text (cap) that «covers» the article. It is optional.<NEW> Administrators can, via the page «<A HREF="aide_index.php3?aide=confart" TARGET="_top">Precise configuration </A>», disable completely the use of the deck.<NEW> </artchap><NEW> <artvirt><NEW> {{{Article redirection}}}<NEW> This option allows you to create a «Virtual Article»: it is an article which has its title, date and authors recorded in your site under SPIP, but which points to another URL.<NEW> This feature enables you to reference in your SPIP system articles that were not created by SPIP (for instance, if you need to integrate to the navigation of your site under SPIP, pages created prior to the installation of SPIP).<NEW> To signal that your article is a «Virtual Article», you just have to enter the URL of the target article in the corresponding box.<NEW> To remove the redirection, you simply «empty» the redirection box (delete the URL of the target article).<NEW> </artvirt><NEW> <artdate><NEW> {{{Date of online publishing}}}<NEW> Generally, the article's {date} corresponds to the date of its {online appearance} (or publication on the web site).<NEW> - This date is automatically set to the time of the article's {validation} by an administrator (therefore, to the time of its appearance on the public site).<NEW> - However, after validating the article, the administrator can still modify this date.<NEW> </artdate><NEW> <artdate_redac><NEW> {{{Date of earlier publication}}}<NEW> This feature was added for very specific cases, where SPIP is used to install archives {and} where these archives must have a publication date different from the online date.Това дава възможност да определите даден документ като обект на предишна публикация: статия от вестник, книга и др.<NEW> - by default , this date is not displayed: the option «Hide date of earlier publication» is selected at the time of the creation of the article.<NEW> - If you want to specify such a date, you must select the option «Show date of earlier publication» as well as use the drop-down menus to set it up.<NEW> Unlike the «publication date» of the article, this date is not automatically determined at the time of the validation of the article. That is why it can be modified at any time.<NEW> {The site administrators can disable the use of the earlier publication date in the «<AHREF="aide_index.php3?aide=confart" TARGET="_top">precise Configuration</A>» section.}<NEW> </artdate_redac><NEW> <artdesc><NEW> {{{Brief description}}}<NEW> The {brief description} is used for the purpose of navigating in the site: it shows briefly the topic of the article, in the contents page for instance.<NEW> This description is optional; furthermore it can be of any length. However, it was originally meant for short texts (one or two sentences), which will show in the lists of articles (contents, list of a particular author's articles, sorting of articles by keywords, search engine results, etc.)<NEW> {The site administrators can completely disable the display of the description in the «<A HREF="aide_index.php3?aide=confart" TARGET="_top">precise Configuration</A>» section.}</artdesc><ins_img>{{{Вмъкване на изображения в текста}}}СПИП предлага възможност да се илюстрират статиите и новините с изображения. Това може да се постигне с няколко действия: трябва да изпратите файла с изображението на сайта, след това да го добавите в текста.-------<NEW> Preparing: {{Images formats}}<NEW> When you create your images (with your usual application), you must save them in one of the following formats:- GIF; (extension {{.gif}})- JPEG; (extension {{.jpg}})- PNG (extension {{.png}}).<NEW> You should particularly make sure that your files names end up with an extension indicating their format: {{.gif}}, {{.jpg}} or {{.png}}. If you install a file with a missing extension in its name, the system will be unable to use the image.<NEW> ------<NEW> Step 1: {{Installing the images on the server}}<NEW> <img src="AIDE/ins_img1.gif" alt=" " border="0" align="right">Before you can insert your images in the text, you obviously have to install them on the server. This is achieved, in SPIP, through the graphical interface.Когато "променяте" статия или новина, лявата колона показва форма, наречена: "Добавяне наизображение". Тя се превръща в {текстово поле}, последвано от бутон, наречен (в зависимост от версията на Вашия интернет навигатор) "Търсене", "Избиране", "Файл" и т.н.<NEW> When you click on this button, a dialogue box opens to allow you to browse your hard disk and select the graphic file you want.<NEW> Having done this, click on the button called: «Upload».<NEW> If the operation succeeds, your image will appear in the left column, accompanied by several settings...-------<NEW> Step 2: {{information concerning your image}}<NEW> <img src="AIDE/ins_img2.gif" alt=" " border="0" align="right">Once your image sent to the server, a box appears on the left of the screen. It contains all the information concerning this image. (part of this information will be masked, click on the small triangle to «unfold» the information box).<NEW> {image size.} Just above the image, the width and height of your image (in pixels) are displayed.<NEW> - {display as thumbnail}. A preview of your image appears. If the image is too large (more than 200 pixels wide), a thumbnail of the image is displayed instead.<NEW> - {SPIP shortcuts}. see below: SPIP will remind you of the 3 «shortcuts», which enable you to insert this image within your text. It is worth noting that every image is «numbered» thus: «IMG1», «IMG2»... These «shortcuts» are used in the third step.<NEW> - {Image size}. Just above the image, its width and height (in pixels) are displayed.<NEW> - { Image title and description}. If you wish, you can enter a title and a description for each image, such as an explanation, the photographer copyright notice...<NEW> - {Delete this image}. As you can guess, «Delete this image» button allows you to delete this file, if you made a mistake or if you decide you do not want to use the image in the text. It is advisable to delete unused images to prevent clogging the server with unwanted files.Можете да повторите операцията с колкото изображения пожелаете (една статия или новина може да съдържа множество изображения).<NEW> -------<NEW> Step 3: {{Inserting an image inside the text}}<NEW> At this stage, the graphic files are actually stored on the server, yet you need to indicate where they should be inserted in your text. There is no need to write HTML for that, SPIP offers you a «shortcut» enabling the insertion of your image easily.<NEW> - {Images without caption}<NEW> For each image, look at the 3 shortcuts:- <IMG1|left>- <img1|center>- <IMG1|right><NEW> Copy one of these shortcuts (the figure corresponds to the number of the image, it then changes for each file), and paste it inside the box called «Text», at the location you want the image to appear. «left» aligns the image to the left, «right» to the right and «center» centres your image in the text.<NEW> When the page is displayed, SPIP will replace these shortcuts by the corresponding HTML tags by automatically calculating the dimensions of the images.<NEW> - {Images with title and description}<NEW> If you entered a title and/or a description, the code <img...> is replaced with:- <doc1|left>- <doc1|center>- <doc1|right><NEW> These shortcuts are used in the same way as above; however, when you insert such a «shortcut», SPIP inserts not only the image but the title and the description that you previously entered. Thus, your image appears with the eventual explanation, copyright notice, the name of the artist etc.<NEW> </ins_img><NEW> <ins_doc><NEW> {{{Attaching multimedia documents}}}<NEW> The SPIP interface allows you to integrate multimedia files to your site (sound, video, text,...).<NEW> Editors can attach documents to articles. These documents can be located either at the end of the text (a bit like «attachements»), or inside the text as a preview vignette (or thumbnail).<NEW> Site administrators can also install documents directly in the sections.Трябва да забележите важната разлика между двата начина: в статиите документите са "приложения" и те са безполезни без самите статии (когато разглеждате сайта, можете да достигнете до тези файлове само през статиите); когато те се поставят направо в рубрикитие, документите сами стават елементи на сайта каквито са статиите и новините, а не допълваща информация.<NEW> --------<NEW> Step 1: {{Installing the documents on the server}}<NEW> <img src="AIDE/ins_doc1.gif" alt=" " border="0" align="right">The files installation on the server is performed through the interface «Attach document» for the articles and «Publish a document in this section» for the sections.<NEW> Notice that, for the articles, this interface appears in two different locations: at the bottom of each article's page and on the left (under the images) when you modify an article. Those two interfaces have exactly the same functions, and you can use either of them according to your needs. As for the sections, the documents installation is performed on the page required section itself.<NEW> Before you install your files, you have to create them on your computer. The document upload interface reminds you of the list of formats supported by the system. {You should make sure that you name your files with the correct extension (for instance, }«xxxxxx.mp3»{ for an MP3 file.})Интерфейсът е същия, като този, за изображенията: бутонът "Файл" или "Търсене" (в зависимост от навигатора) отваря прозарец, който позволява да се избере файл от диска. След като изберете желания файл, натискате "Качване", за да го изпратите на сървъра. {Предупреждение: тази операция може да отнеме доста време, в зависимост от размера на файла. Забележете също така, че в зависимост от настройките на Вашия доставчик, големите файлове могат да бъдат отхвърлени; в такива случаи трябва да заобиколите ограничението чрез <A HREF="aide_index.php3?aide=ins_upload"TARGET="_top">Инсталиране на файлове чрез FTP</A>.}<NEW> ---------<NEW> Step 2: {{Information and vignette}}<NEW> <img src="AIDE/ins_doc2.gif" alt=" " border="0" align="right">Once the file has been transferred to the server, an information box appears. Several operations can be performed therein.<NEW> - {Preview vignette}<NEW> This idea is very important: unlike images which can be inserted in the text, documents do not appear straight away. A preview vignette is displayed to the visitor who clicks on it, should he need the corresponding document.<NEW> The top part of the information box allows you to choose the preview vignette. You can accept the {default vignette} or install a {customised logo}.<NEW> The default vignette is installed automatically by the system, depending on the document format. The advantage of accepting this vignette is that the symbols of the documents of the same type for the whole site will be consistent.<NEW> If you prefer, you can install a logo (preferably small and of the format GIF, JPG or PNG), which will appear instead of the default vignette. Once this logo installed, a «Delete the customised vignette» link allows you to go back to the default vignette if necessary.<NEW> - In the article modification page, the «shortcuts» allowing you to insert a document in the text are identical to the images ones.<NEW> - The bottom part enables you to enter a title and a description for your document. There is no need to enter here the format or the size of the multimedia file, this information will be automatically provided by the publishing system.<NEW> - Finally, the button «Delete this document» deletes the unnecessary files. {You should note that it is imperative to delete unwanted documents, otherwise they would appear on the public site.}- {{Относно документите, добавени в рубриките,}} можете също да променяте датата на публикацията им (на същия принцип за променяне при статиите и новините). Веднъж като се изпратят настройките, документите в рубриката стават незабавно видими на публичния сайт (при тях не е нужно да се дава одобрение като при новините и статиите.<NEW> ---------<NEW> Step 3: {{Insert documents in articles text}}<NEW> Concerning the documents associated with articles, you can simply install them and enter the information (steps 1 and 2 above). When you publish the article, these documents will appear at the end of the text in as a list of {attached documents}.<NEW> However, you can also decide to insert the preview vignettes inside the text. You will have then, images that you can click inside the article.<NEW> The procedure here is exactly the same as the one for the images, the only difference is that the vignettes will be elements that you can click. Insert a shortcut like <imgxx|yy> or <docxx|yy> whether you want to display the vignette alone or with its title and description.<NEW> {You should note that} the documents that you install inside the text will not appear {under the article} anymore. For articles, there two locations where the documents appear: inside the text (vignette that you can click), or at the end of the article under the expression «Attached documents».<NEW> ----------<NEW> Special case: {{Video and sound documents}}<NEW> Some multimedia files are meant to be displayed directly on a web page (for instance, a video clip inserted directly in the article).<NEW> To be able to insert such documents inside the text as a multimedia animation and not as a vignette, you must enter its dimensions: width and height strictly greater than zero (for sound files you choose the width you wish to attribute to the play cursor and a low height such as 25~pixels).<NEW> {You should note that} the boxes allowing you to enter the dimensions will only appear for the documents of certain formats supported by SPIP for their integration in the articles (namely: avi, quicktime, real, flash).<NEW> Once you have entered these dimensions, an additional SPIP shortcut will be provided, in the shape of <embxx|yy> (as a reminder «{{emb}}ed»).<NEW> If you are very familiar with this sort of integration, you will be happy to know that you can add additional parameters such as:<NEW> <cadre><emb54|center|autostart=true|quality=hight></cadre><NEW> </ins_doc><NEW> <ins_upload>{{{Инсталиране на файлове чрез FTP}}}Някои сървъри не позволяват качването на файлове през уеб-интерфейс. Следователно, може да е много тромаво да се изпращат големи файлове по този начин. СПИП позволява да се преминат тези ограничения чрез инсталиране на файлове, използвани за изображения и документи чрез FTP.Разбира се, тази операция е ограничена за потребители, които притежават кода за връзка към сървър FTP.<NEW> - {{The folder /ecrire/upload}}С Вашия FTP клиент, трябва само да качите файловете си (изображения, мултимедия, документи) в папката /ecrire/upload на Вашия сайт под СПИП.<NEW> - {{The files drop-down menu}}<NEW> Having done that, a drop-down menu appears automatically after the interface of web files uploading and displays the files contained in this folder. You just have to select the file that you need and validate your choice.<NEW> If the operation succeeds, remember to delete the file from the folder /ecrire/upload (the system has created a copy of this file in another location on the server, your original file is therefore not needed anymore), to avoid jamming the drop-down menu.<NEW> - {{All the files at once}}<NEW> If you install several files at once in the folder /ecrire/upload, an additional feature will be available to you on the site interface: you can install all these files in one batch. This could prove to be very practical while creating fast portfolios.<NEW> </ins_upload><NEW> <artmodif><NEW> {{{Article in current editing}}}<NEW> When an editor opens an article to edit it, other participants visiting the page are notified and advised not to edit the article themselves.<NEW> As a matter of fact, if two editors intervene at the same time on the same article, the modifications entered by one of them could overwrite the modifications of the other.<NEW> If you see the notice «Warning, an editor intervened on this article», it is strongly advised not to modify for the time being. Come back later to this article, to edit it when the other editor finishes his modifications and saves them.<NEW> On the other hand, when you yourself intervene on the article, the other participants who visit this page will be notified of your intervention. As long as you are in the modification process, and for {{an hour}}, the other editors are requested not to intervene on the text. When you think you have finished working on the article, then others can start intervening, you can «release» this article. The warning shown to the others will disappear which enables them to enter their modifications if necessary.<NEW> </artmodif><NEW> <artmots><NEW> {{{Keywords}}}С цел да се разнообрази разглеждането на сайта, възможно е да се добавят <A HREF="aide_index.php3?aide=mots" TARGET="_top">Ключови думи</A> към статиите, новините и свързаните сайтове. По този начин не само посетителите ще могат да търсят от рубрика в рубрика, но също и от статия на дадена тематика (означена с ключова дума) към друга статия, свързана със същата ключова дума.За всяка статия, новина или сайт можете да определите толкова ключови думи, колкото пожелаете.<NEW> A drop-down menu lists all the keywords of the site. It is very easy to use. {Note: if the number of keywords exceeds 50, this drop-down menu is replaced by a search engine: just enter the desired keyword and click on «Search».}<NEW> {{P.S.}} Only the administrators can create keywords from within the page dedicated to their management (the «Keywords» button in the top navigation bar).<NEW> {Administrators can disable the use of keywords for the whole site in the «<A HREF="aide_index.php3?aide=confart" TARGET="_top">precise Configuration</A>» section.}<NEW> </artmots><NEW> <artprop><NEW> {{{Submitting an article}}}<NEW> While an article is in progress (see the section «<A HREF="aide_index.php3?aide=artstatut" target="_top">Article status</A>»), it displays a button «asking for the publication of this article».<NEW> {Only the article's author is allowed to perform this operation.}<NEW> This means that the article is «submitted for evaluation», that is, submitted to all the other editors who are requested to comment on it while awaiting to be validated (published) or rejected by the administrators.<NEW> Warning: once the article is submitted for evaluation, it is not possible anymore for the author to reconsider his decision and to re-place his text in the «editing in progress» mode.Consequently, the operation «Ask for the publication of this article» must only be performed after the author makes sure that his text is complete and final. Only an administrator can place the text again in the «editing in progress» mode.<NEW> </artprop><NEW> <artrub><NEW> {{{Selecting the section}}}<NEW> The menu shows the complete <A HREF="aide_index.php3?aide=rubhier" target="_top">sections hierarchy</A> (in the order in which they where created by the site administrators): select the section in which you want to place your article.<NEW> A lot of novice users seem to be oblivious to this feature though very simple, and drop their article «anywhere» in the site structure. Consequently, the administrators are advised to always check if an article is in the right section before validating it.<NEW> </artrub><NEW> <artstatut><NEW> {{{Article status}}}<NEW> The article {status} concerns its editorial situation in the site. the article can take the following states:- editing in progress;- submitted for evaluation;- published online;- to the dustbin;- rejected.<NEW> These states, that only the administrators can modify, enable the site management.<NEW> {{P.S.}} the articles status is symbolised by coloured bullets.<NEW> <IMG SRC="img_pack/puce-blanche.gif"> {{editing in progress}}<NEW> When it is created, an article is of course considered as being in progress: its authors are in the process of writing it or modifying it ...<NEW> {When editing is in progress, the article appears only to its authors and to the administrators. the other site editors do not have access to it.}<NEW> <IMG SRC="img_pack/puce-orange.gif"> {{Submitted for evaluation}}<NEW> When the author considers that his article is ready, he «suggests» it to the other participants, so that it could possibly be discussed collectively, before being validated (published online) or rejected.<NEW> {When the article is «submitted for evaluation», it appears in the «Launch pad» page of all the users of the private area, who are requested to join in its discussion through the internal discussion forum located below the article.<NEW> Such an article is then visible to all editors. On the other hand, it can only be modified by its author or an administrator.}<NEW> <IMG SRC="img_pack/puce-verte.gif"> {{Published online}}<NEW> After being possibly discussed by the editors (during the submission stage), an article could be «validated», that is, published online by an administrator. By then, it is available to all the visitors of the public site.<NEW> {Once an article has been published online, onlyadministrators can modify it. Its author - unless also an administrator - can no longer modify it,but has to go through an administrator to make any corrections.}<NEW> <IMG SRC="img_pack/puce-rouge.gif"> {{Rejected}}<NEW> A «submitted» article, which does not conform to the editorial line of the site, can be «rejected» if the administrators refuse to publish it online.<NEW> {A «rejected» article becomes visible only to its author and to the administrators.}<NEW> {However, a «rejected» article cannot be modified by its author anymore, hence stopping him from re-submitting it for publication. In the case of an article requiring modification, it is then advised to re-place the article in the «editing in progress» status instead of just «reject» it, in order for its author to be able to modify it and re-submit it later.}<NEW> <IMG SRC="img_pack/puce-poubelle.gif"> {{To the dustbin}}<NEW> An article can be sent «to the dustbin» only by an administrator.<NEW> {An article sent «to the dustbin» is not visible anymore in the private area, even for the administrators. Be careful then, this option is «radical»: the article disappears completely.<NEW> In fact, the article is still saved in the database, but becomes extremely difficult to reach with the tools provided by SPIP.}<NEW> Therefore, this option is reserved to articles created by mistake, and destined to be totally removed. Often then, it is advised to choose the «rejected» option instead because it is less dramatic.<NEW> - Finally, it is worth noting that the administrators can, at any time, modify the {status} of an article. Hence a published article could well be placed again in «editing» mode. However, once an article is published online, do not overdo these changes of status: you will end up with a site «full of holes», with appearing and disappearing pages, which is very penalising for the visitor.<NEW> </artstatut><NEW> <arttexte><NEW> {{{The article's text}}}<NEW> Pretty straightforward: this is the {text} of your article as its name suggests.<NEW> - However, there is one point which could create a problem: the length of the text. It happens sometime that if the text is too long (according to our own experience, bigger than 32 Kb), it is truncated or indeed rejected during its transfer to SPIP. This problem is not caused by SPIP, but by the web browser that you are using. If you find yourself with a very long text for one browser, try to use another one.- Текстът на статията е много добре нагоден да се използав с <A HREF="aide_index.php3?aide=raccourcis" TARGET='_top'>типографските кратки команди</A><NEW> </arttexte><NEW> <arttitre><NEW> {{{Title, top title, subtitle}}}<NEW> - The {title} is compulsory.<NEW> - The {top title} and the {subtitle} are completely optional. If you do not need them, leave them blank, the site layout will adapt automatically to their presence or absence.<NEW> {Should they wish so, the administrators can disable the use of the top title and/or the subtitle in the «<A HREF="aide_index.php3?aide=confart" TARGET="_top">precise Configuration</A>» section.}<NEW> </arttitre><NEW> <confart><NEW> {{{Articles content}}}<NEW> The articles are made of a number of elements: the title, the top title, the subtitle, the description, the deck, the postscript... However, some sites do not need all these elements: either the editors do not use them or the graphical interface of the public site does not include them.<NEW> In order to lighten the site's management interface and/or simply to stop the editors from using certain elements that the webmaster does not wish to include, the «precise configuration» page allows to disable completely the use of these elements.<NEW> {{P.S.}} It is important to understand that, with regard to the choice of <A HREF="aide_index.php3?aide=intersimple" target="_top">{simplified interface / complete interface}</A>, which only influences the interface of each user, the choice of the options of the «Precise configuration» influences all the users. So if you disable the use of the top title, no editor and no administrator could use top titles in his articles.<NEW> The interface will adapt to the presence or the absence of these elements. If you disable the use of keywords the corresponding button in the top navigation bar will simply disappear.<NEW> </confart><NEW> <confbreves>{{{Включване/изключване на системата за новини}}}Някои сайтове на използват {новини}, т.е. кратки статии без автор. Вероятно администраторът не ги е включил в дизайна на публичния сайт.<NEW> In this case, you can simply decide to disable them. So the editors cannot create them. The interface will be all the less burdened.<NEW> </confbreves><NEW> <confmails><NEW> {{{Automated e-mailing}}}<NEW> Editors and administrators do not necessarily spend their lives in the site management area. To facilitate collective work and follow-up of the site's life, the system can warn by e-mail of some events happening to it...<FONT COLOR="red">Предупреждение: някои доставчици забраняват свойството "автоматично изпращане на електронно писмо". Ако ситуацията е такава, следващите опции не могат да бъдат активирани.</FONT><NEW> - {{Follow-up of public forum messages}}<NEW> In order to enable the authors to follow the discussions triggered by their articles, this option offers to automatically forward to the author each message posted for his article.<NEW> If this option is enabled, the author(s) of the article will receive by mail the text of any message posted for their article as well as a reminder of this article's URL; with one click, he (they) can then go to the page of the article and should he (they) wish to, post an answer to the message.<NEW> - {{ Follow-up of editorial activity}}<NEW> When an article is submitted for validation or published, you can ask SPIP to notify about it by mail. This way, participants to the site are informed in real time of the important developments of the site.<NEW> For a collective site (several editors), we advise you to create a mailing list of editors (SPIP does not provide the mailing list feature), to which you can post messages.- {{Известия за новини}}Свойството, предложено от СПИП, предлага създаване на електронни съобщения от типа "Най-скорошни новини": ако го активирате и укажете забавянето между известията, ще бъде изпращано регулярно писмо по електронната поща до посочен адрес с резюме на най-скоро публикуваните статии и новини.Това свойство е много лесно за изпълнение: ако активирте опцията чрез указване на забавяне от 7 дни, един път на 7 дни, СПИП ще изпраща списък със статиите и новините, публикувани пред тези 7 дни на посочения адрес.<NEW> A «Send now» button triggers the immediate sending of this summary e-mail (and starts a new time interval of 7 days before releasing the next e-mail).Можете да изпращате известието за най-скорошни новини на адреса на главния администратор (който ще го препраща) или, ако харесвате сайтовете със самостоятелно управление, можете да изпращате съобщението до списък от абонати (СПИП не предлага възможност за използване на пощенски списъци).<NEW> </confmails><NEW> <confdates><NEW> {{{Publication of post-dated articles}}}<NEW> It is possible for administrators to modify an article's <A HREF="aide_index.php3?aide=artdate" TARGET="_top">date of online publication</A> (when this article is declared as «published online»).<NEW> How should SPIP behave when we set this date of online publication to a value in the future? Should SPIP publish all the articles, whatever their publication date (risking an odd display with an article showing «31st of May 2002» while we are only on the 21st of May), or should it wait for the due date (here on the 31st of May) before displaying this article on the public site?<NEW> - The main advantage of this operation is to be able to schedule the publication of a series of articles in advance. Practically: the webmaster goes on holiday for a month; if he already wrote some articles, he can place them in the private area as «published online», but set for them publication dates spread over the month while he is absent. That way, rather than publishing online a {bundle} of articles in one go, then nothing for a month, the site will regularly publish «new» articles despite the absence of their author.<NEW> - As for a science fiction site publishing a {Martian chronicle}, it should find it desirable to disable this feature, unless it wants to wait for the year 2030 to publish its stories. The same thing applies to a monthly online publication when it publishes its April issue on the 20th of March.<NEW> </confdates><NEW> <confmessagerie><NEW> {{{Internal messaging}}}<NEW> SPIP offers an internal messaging system (a section of the present documentation is dedicated to the <a href="aide_index.php3?aide=messut" target="_top">messages between users</a>, to the <a href="aide_index.php3?aide=messpense" target="_top">memos</a> and to the <a href="aide_index.php3?aide=messcalen" target="_top">calendar</a>).<NEW> You can decide to use all or parts of this system.<NEW> - {{ Enabling/disabling internal messaging}}Една от причините, за да не се използва системата за изпращане на вътрешни съобщения може да бъде мястото, което съобщенията ще заемат в базата данни: те (както и съобщенията от форума, свързан към Вашата статия например) се пазят в базата данни и следователно заемат дисково пространсво у доставчика. Освен това, свойствата на системата за изпращане на вътрешни съобщения са в допълнителна тежест на машината, която побира сайта: в случай на машина със слаба (и/или много бавна) спецификация, по-добре е да олекотите задачите и да забраните изпращането на съобщения.<NEW> - {{Enabling/disabling the list of connected editors}}<NEW> If you enable this feature, the list of users connected to your site's private area will show permanently. Notably, this will ease the exchange of instant messages between users.<NEW> This feature causes additional queries to the database; you would rather disable this features on a slow machine. It is worth noting that some users find this feature intrusive.<NEW> {You should note that:} When you enable the above features for the whole site, it is still possible, for every user, to <a href="aide_index.php3?aide=messconf" target="_top"> disable these features for his own use</a>. This way, if a user finds the internal messaging functions unnecessary or intrusive, he can simply disable this feature for his own use.<NEW> </confmessagerie><NEW> <confforums><NEW> {{{Operation of public forums}}}<NEW> The way to manage public forums varies from one webmaster to another, namely according to the actual needs of the site. Some webmasters do not want forums, some want free access forums, others still prefer to moderate the forums {beforhand}, by publishing the messages only after they were validated by an administrator.<NEW> SPIP allows you to determine the operation of your public forums (the forums which are internal to the site management are always managed as open forums for all the editors, and moderated {afterwards}).<NEW> - {{Disabling public forums}}<NEW> When the forums are disabled, the sending contributions interface disappears and the old contributions are no longer displayed (they are not deleted from the database, but their display is interrupted). This option stops the operation of the forums, even if the forums display is coded in the site layout (templates).<NEW> You can use it permanently (the site never provides discussion forums) or temporarily (suspend forums activity to calm a crazy spammer or to go on a plane spotting holiday ...or even to transfer your site to another server).<NEW> - {{Afterwards moderated forums}}<NEW> When forums are moderated {afterwards}, contributions are displayed as soon as the users post them. You are then free to use the forums follow-up page provided by SPIP to moderate these messages with various degrees of severity. {a posteriori moderation is the default mode for SPIP.}<NEW> - {{Beforhand moderated forums}}<NEW> In {beforhand} moderated forums, users contributions are stored but not displayed. Administrators must use the forums follow-up page provided by SPIP to validate (or reject) each message.<NEW> - {{Forums accessed by subscription}}<NEW> If the forums are {accessible by subscription}, users wishing to contribute must register by providing their e-mail address. Then they receive their identification by e-mail. For editors who already have access to the private site, this identification corresponds to their usual login.<NEW> This mode is a compromise between the need for responsibility (the participants must provide a valid e-mail address) and the absence of beforhand moderation (once they are registered, these users can post their contributions directly).<NEW> Furthermore, this mode allows to exclude users who misuse forums ({black-list}). As a matter of fact, when you delete (via the forums follow-up page) a contribution posted in the «by subscription» mode, you can have access to the «file» (extremely small) of the author of this contribution. You can simply send this author «to the dustbin»: his identification will not work anymore and he will not be able to obtain a new one with the same e-mail address.<FONT COLOR='red'>Предупреждение: формата "форум чрез абониране" изисква доставчикът Ви да поддържа автоматично изпращане на електронни писма. Ако той не поддържа това, сменете доставчика си ;)</FONT><NEW> </confforums><NEW> <confmoteur><NEW> {{{Enabling/disabling the search engine}}}СПИП има вградена търсеща машина. Когато тя е включена, система за индексиране на статии анализира съдържаниета на всички статии. Тази операция, въпреки че предлага допълнителни много бързи условия за търсене, изисква много усилия за сървъра, на който се помещава сайта. В случай, че доставчикът е бавен, това може да породи проблеми.<NEW> For this reason, you can enable or disable the system indexing.<NEW> Data managed by the search engine integrated to SPIP nearly {{treble}} the disk space used by the database. On the other hand, on slow or heavily loaded systems, indexing could cause a slight degradation of performance, or even execution errors (extreme case).<NEW> Generally, if your site is very large, we advise not to use the search engine integrated to SPIP, and to choose other specialised products such as <HTML><A HREF='http://www.htdig.org/' target="_blank">ht://Dig</A></HTML>.<NEW> You should also note that the search engine does not index all the pages in one go. If you enable it while your site contains already a big number of articles, you have to wait until your site records a number of hits (approximately) equal to the number of texts to index in order for the engine to be updated.<NEW> </confmoteur><NEW> <confnom><NEW> {{{Name and URL of your site}}}<NEW> The name and URL of your site are, in particular, used to generate the file «backend.php3» which allows the syndication of your site (i.e. display the last 10 articles published by your site in another site).<NEW> Your site's URL must be the address of the homepage {folder} not that of the corresponding HTML file; therefore it must be ended with the character «/». If your homepage address is:<NEW> <HTML><TT>http://www.mysite.net/index.html</TT></HTML>,<NEW> Your site's URL should be written thus:<NEW> <HTML><TT>http://www.mysite.net/</TT></HTML><NEW> </confnom><NEW> <confstat><NEW> {{{Visits statistics}}}<NEW> SPIP contains a very simple system allowing you to count and track the number of visits to the site and to each article. It also allows you to know which other sites directed visitors to your site and to each article.<NEW> - {{Number of visits}}<NEW> Every day, SPIP identifies «unique visitors» to your site according to their IP address. The system is fast and {relatively} reliable (it is a {relatively} accurate estimate of the number of visitors to the site, and not just «hits» or «watched pages»; a visitor coming back several times to the same page is counted as a unique «unique visitor»).<NEW> - {{Direct visits or referrers}}<NEW> A «direct visit» is an arrival to the site or to an article's page from another web site which contains a hypertext link to your own site (the former is itself considered as a «referrer»).<NEW> For the entire site and for each article, SPIP displays the list of the main «referrers» (the pages displaying a hypertext link to your site), accompanied by the number of «direct visits» (the number of visitors who followed this link).<NEW> -----<NEW> - {{A «relatively» reliable system}}<NEW> A complete system for traffic analysis is a very demanding application in terms of power and memory; therefore, the SPIP system is very simplified in order to be as fast as possible and as small as possible on the server's hard drive. Furthermore, the counting of «unique visitors» is based on the visitors IP address every day, which is not the most precise method, we think, however, that it provides a «relatively» reliable information.<NEW> If you want a thorough information of your site's traffic, you could use another system more specialised in statistical analysis.<NEW> - {{A daily calculation}}<NEW> The traffic follow-up system integrated to SPIP performs calculation of the number of visitors and referrers daily (not in real time). Consequently, some information could sometime look incoherent because it does not integrate the visits of the actual day, if in doubt, the specific page displaying the statistics is the one most reliable and detailed. Therefore, the statistics page of an article is only available after the first day of publication of that article (figures are unknown before that because SPIP has not analysed them yet).<NEW> - {{Enabling/disabling statistics and referrers}}<NEW> The counting of the number of unique visitors should not occupy a lot of space neither use a lot of computing power. There is no point, then, to disable it unless the server is very slow.<NEW> On the other hand, the system of counting referrers and direct visits is more demanding. it is, therefore, disabled by default. It is advised to enable it only on servers with no problems in computing power (servers which already struggle to calculate lengthy articles cannot surely cope with the burden of referrers calculation).<NEW> - {{PS:}} Disk space and computing time necessary for the follow-up of visits and referrers increase with your site's traffic. The more a site is visited, the more the technical needs to perform these tasks increases.<NEW> </confstat><NEW> <install0>{{{Предварително: поставяне на разрешения}}}Когато инсталирате СПИП файлове на сървъра чрез FTP, някои {{директории}} няма да бъдат конфигурирани правилно: следователно, трябва да промените конфигурацията им през обичайния си FTP клиент.Променете "разрешенията" на следните директории:- {{/CACHE}}- {{/IMG}}- {{/ecrire}}- {{/ecrire/data}}FTP клиентите се различават по функции, но процедурата е най-общо следната:- изберете папката, на която желаете да промените "разрешенията";- намерете във Вашия FTP клиент свойство, наречено "{смяна} или {промяна} или {настройка} на разрешения;<NEW> - If this feature appears as a graphical interface, check the box corresponding to «Write» for the «Others» (or «World» or «All users»):<CENTER><img src="AIDE/install0.gif" alt=" " border="0"></CENTER><NEW> - If this feature appears in «text» mode, the numeric configuration is «777».<NEW> When you make this modification for every directory indicated by the installation system, you must reload the page and the procedure resumes automatically.<NEW> </install0><NEW> <install1><NEW> {{{Your MySQL connection}}}<NEW> This step consists of entering the necessary information for the connection of SPIP to MySQL server.- {Адрес на базата данни:} в зависимост от това, кой доставчик сте избрали, тази информация ще бъде просто "местен доставчик (localhost), или адреса на Вашия сайт («www.moia_site.org»).- {Потребителско име на връзката:} често е същото потребителско име, което използвате за да качвате файлове чрез FTP.- {Парола на връзката:} често е същата парола, която използвате за достъп до FTP сайта.- Настройките не могат да бъдат измислени: ако не ги знаете, значи, че доставчикът Ви не Ви ги е дал. Следвателно => ако нямате тази информация под ръка, няма как да продължите!- Настройките Ви се дават от {{доставчика на Вашия сайт}}: за да ги получите, свържете се направо с него (не е нужно да ги искате от екипа за разработка на СПИП, защото ние не ги знаем!). Някои доставчици имат написана тази информация на сайтовете си под формата на наръчник.- Трябва да забележите, че много често се налага да {{искате}} от доставчика си да активира достъпа Ви до MySQL или да изпълнявате тази специфична процедура сами. Някои доставчици, които твърдят, че предоставят поддръжка за базата данни MySQL, не активират автоматично връзката, когато настройват за първи път сайта да работи. Необходимо е допълнително да го помолите за това (след като откриете име за достъп до доставчика). В този случай, отнесете се към документацията, предоставена Ви от доставчика, за да узнаете как да {активирате} връзката си до MySQL. (Отново, екипът на СПИП не може да помогне за това).<NEW> </install1><NEW> <install2><NEW> {{{Choosing your database}}}- Трябва да изберете {име} на базата данни, която Ви е отдадена от доставчика. Тази информация е осигурена от доставчика: ако нямате такава, обърнете се към него или към документацията, публикувана в интерене (няма нужда в случая да се обръщате към екипа за разработване на СПИП, защото ние я нямаме).- Много често, тази информация отговаря на {потребителското име} за входа за доставчика (тази, която използвате, за да се свържете със сайта си чрез FTP).- Първа възможност (по-често срещана): списъкът с имена за достъп е показан (понякога е доста дълъг, в зависимост от конфигурацията, който доставчикът е задал). Измежду именатаима само едно, което отговаря на Вашето; просто го изберете и го одобрете, за да може да преминете на следващия етап.- Втора възможност: само едно име за достъп, отговарящо на Вашето, е показано (доставчикът Ви автоматично е конфигурирал системата да показва само Вашето име). Лесно: изберете името и го одобрете.<NEW> - Third option (generally, for a professional account or on a server over which you have extended rights): you must {create} your own database. In this case (after verifying that such an account does not exist in the above list), you can enter the name of your choice next to the instruction «create a new database».- Последна възможност (грешка): Вашето име за достъп не се появява в списъка и не можете да създадете такова. Това е рядък случай: означава, че Вашият доставчик е създал достъп за Вас до сървъра с базата данни, но е забравил да Ви създаде име за достъп. В този случай трябва да се свържете направо с него.<NEW> </install2><NEW> <install5><NEW> {{{Personal information}}}<NEW> This step is very simple, but it should be completed carefully. Indeed, it is this step that determines your site connection identification! if you proceed hastily, you might not be able to connect...<NEW> Note that once your site is installed, you will have the possibility to change this information.<NEW> - {Your public identity:} that is what will appear as a signature of your articles.- {Идентификация на интернет връзката:} това е идентификация, която {{Вие сам(а) избирате}}, за да се свържете с Вашата СПИП система. Тази информация не е нужно да е същата, която доставчикът Ви е предоставил за връзка с FTP сървъра. Обратното, {по-добре НЕ ИЗПОЛЗВАЮТЕ същите потребителско име и парола} за достъпа до СПИП (който можете свободно да изберете), за разлика от връзката с FTP (която Ви е указана от доставчика).<NEW> </install5><NEW> <intersimple><NEW> {{{Simplified interface / complete interface}}}<NEW> Each SPIP user can modify his own display (without affecting the display for the other users, contrary to the «<A HREF="aide_index.php3?aide=confart" TARGET="_top">Precise configuration</A>» page).<NEW> Several SPIP features are very rarely used (or not at all) by some editors. Therefore, choosing the «simplified interface» allows to lighten this interface and to simplify its comprehension. In this mode, only the elements really necessary to the management of the site are displayed. For example, very few users need the «<A HREF="aide_index.php3?aide=artdate_redac" TARGET="_top">date of earlier publication</A>» which does not appear in the «simplified interface» mode.<NEW> {{P.S.}} the differences between the two mode of display are more obvious to the administrators who have at their disposal more features than the editors of the site.<NEW> {For these modifications to take effect, you must accept the use of cookies.}<NEW> </intersimple><NEW> <logoart><NEW> {{{Article's logo}}}<NEW> With SPIP you can install a logo corresponding to the article. This way, it will be possible, in the public site, to display a graphic button linking to the article.<NEW> For an article, it is possible:- not to use any logo;- to install a simple graphical logo;- to use an animated logo that supports «hovering» (a logo with «2 positions»: the logo changes when the mouse hovers over it).<NEW> - {{Images formats}}<NEW> When you create your images (with your usual application), you must save them in one of the following formats:- GIF (the GIF file could be an «animated GIF»);- JPEG;- PNG (we advise against it because several browsers do not support it correctly).<NEW> {In order to avoid serious operating errors, SPIP rejects image files bigger than 256 KB.} Advice: because these «buttons» are elements of the graphical interface, make sure that their {file size} (in kilobytes) is not too big (generally, less than 10 KB) if you want your site navigation to remain fluid.<NEW> In particular, make sure that the names of your files have an {extension} indicating their formats: {{.gif}}, {{.jpg}} or {{.png}}. the file name itself is of no importance whatsoever provided that {you do not forget the extension}.<NEW> {If you create a button which supports «hovering», create two different graphic files (one for the «normal» state of the button and another one that appears when the mouse hovers over the button): it is imperative, then, that the two files have the same size (in pixels).}<NEW> - {{Simple logo}} (no hovering)<NEW> <img src="AIDE/logoart-1.gif" alt=" " border="0" align="right">To add a button, a box is provided in the left column of the article, under the title «ARTICLE'S LOGO».<NEW> Depending on your browser version, click on the button «Browse», «Select», «File»...which opens a dialogue box allowing to select the graphic file corresponding to your button from your hard drive.<NEW> Once the file is selected, click on the button «Upload». Et voilà...! your button appears. It is followed by a button «Delete logo» that simply offers you to delete this logo.<NEW> If you do not plan to use a hovering logo, no more steps are needed.<NEW> - {{Replacing the logo}}<NEW> <img src="AIDE/logoart-2.gif" alt=" " border="0" align="left">You could wish to replace the logo with another file. This is achieved in two steps:- start by «Deleting the logo»: the previous box, containing the «Upload» button reappears;- upload the new file, according to the procedure already described.<NEW> Due to the browsers way of work, the image which is displayed then, is wrong, since it is in fact the previous version (the image is in the browser's «cache»). Click on this image (with the right button of your mouse, or while pressing the «ctrl» key on the Macintosh) to show a contextual drop-down menu: select the option «Reload image». The new version of your logo will then appear.<NEW> - {{Logo for hovering}}<NEW> <img src="AIDE/logoart-3.gif" alt=" " border="0" align="right">After installing the first file, the box displays not only the logo you have just installed on the server, but adds to it a second box, entitled «HOVERING LOGO». It is in this box that you can select the second file aimed at the management of hovering.<NEW> {If, after installing both files, you delete the first one (the «simple» button), the box of the second logo disappears. Indeed, in the absence of the first logo, there is no point in managing any hovering!}<NEW> No intervention in the «text» of your article is necessary. At the time of the display on the public site, the management of the sections logos is entirely automated. The HTML code will be generated according to the size of the logo, and the hovering instructions in JavaScript will be created automatically as well.<NEW> </logoart><NEW> <raccourcis><NEW> {{To make the layout of the documents published bySPIP easier, the system offers a number of «SPIP shortcuts» which:- simplify matters for users who do not know HTML;- make it possible for page layout to be processed automatically.}}<NEW> So naturally you can still use HTML code in your SPIP documents, but we advise you to use preferably these few SPIP shortcuts, which are much easier to remember and especially, provide the system with some automated operations.}}<NEW> ~{{{Прости типографски кратки команди в СПИП}}}<NEW> To start with, we present the simplest and most common shortcuts. For the users who wish to have more control over the layout of their texts, we shall further present more complex versions of these shortcuts.<NEW> {N.B.} The simple shortcuts fairly fulfill most needs, and make online publication almost as easy as writing an email.<NEW> - {{Typographie française automatique}}<NEW> SPIP respecte automatiquement les principales règlesd'espacement de la typographie française - ainsi des espacesinsécables sont ajoutées devant les caractères«:», «;», «!», «?»~-,et place des espaces insécables avant et après lesguillemets «à la française».<NEW> <NEW><NEW> (Note: cette fonctionnalité n'est activée que sur les sitesdont la langue principale est le français.)<NEW> - {{Creating paragraphs}}<NEW> To create paragraphs, you simply leave a blank line, a bit like separating paragraphs in a e-mail (by «skipping» a line).<NEW> The simple «line feed» (enter or return) without separating the two paragraphs is insufficient to create a new paragraph (as a matter of fact, it does not even create a line feed).<NEW> You can leave several consecutive blank lineswithout any effect on the layout.<NEW> - {{Creating bulleted or numbered lists}}<NEW> You can create lists in SPIP in the same way as in an e-mail: you only enter a line feed and start the new line with a dash («-»).<NEW> Notice that, here, a simple line feed is enough (you can createlists in the same paragraph); butif you leave a blank line before the one beginning with a dash, then a blank line will appear before the list<NEW> For example, <cadre>- I like work;- it fascinates me.- I can sit and look at it for hours.(Jerome K. Jerome)</cadre>will display:<quote>- I like work;- it fascinates me.- I can sit and look at it for hours.(Jerome K. Jerome)</quote><div align='right'><a href='#listes'>more information on the lists</a></div><NEW> {{Bold and italic}}<NEW> You specify a text in {italic} by placing it between simple braces: «<HTML><TT>...some text {in italic} in...</TT></HTML>».<NEW> You specify a text in {{bold}} by placing it between double braces: «<HTML><TT>...some text {{in bold}} in...</TT></HTML>».<NEW> - {{Paragraph headings}}<NEW> Paragraph headings are titles inside atext that show its structure. In SPIP, they arevery simply defined by placing them betweentreble braces: «<HTML><TT>{{{Section heading}}}</tt></html>» will display the heading, bold and centred:<quote>{{{Section heading}}}</quote><NEW> - {{Horizontal rule}}<NEW> It is very simple to insert a horizontal rule (or a separation line) across the width of the text: you just insert a line containing only a series of at least four dashes, thus:<NEW> <cadre>----</cadre><NEW> returns:<quote>----</quote><NEW> ----<NEW> - {{Hypertext links}}<NEW> You can easily create a hypertext link with the following code:<cadre>SPIP is an initiative of the [minirezo->http://www.minirezo.net/].</cadre>which becomes<quote>SPIP is an initiative of the [minirezo->http://www.minirezo.net/].</quote>(To help remember: the dash followed by the greater-than sign makes a kind of arrow, showing that the link's text (before the arrow) "points to" an address.)Адресът на препратката може да бъде абсолютен (започващ както в примера с <code>http://</code>), относителен (препратка към друга страница от същия сайт), препратка към документ, който използва интернет протокол (<code>ftp://</code>...) или електронен адрес («<code>[->mailto:minirezo@rezo.net]</code>»).<NEW> Specific application: when nothing is entered before the "arrow", the text of the passed URL is displayed as a clickable link. For example:<cadre>[->http://dmoz.org/World/Deutsch/Kultur/Literatur/Autoren_und_Autorinnen/P/Proust,_Marcel/]</cadre>returns:<quote>[->http://dmoz.org/World/Deutsch/Kultur/Literatur/Autoren_und_Autorinnen/P/Proust,_Marcel/]</quote>Remember that in the case of very long URLs, the display is truncated (in order to avoid the degradation ofyour graphic interface), but the hypertext link points to the correct address.<NEW> - {{Hypertext links inside the site}}По-нататък, същата тази система за хипертекстови препратки улеснява създаването на препратки вътре в сайта, работещ под СПИП. Единствената особеност се състои в намирането на {номера} на статията, рубриката или новината, към който желаете да насочите препратката:<img src="AIDE/articlenumero.gif" alt="NUMERO" border="0" align="right">Когато "посетите" някоя статия, новина или рубрика в личната зона, в лявата колона има поле, указващо този номер с големи цифри.<NEW> This is the number that you should insert in the hypertext link:<NEW> -* Link to article 342 (4 possibilities):}<HTML><TT><BR>link to [article->342]<BR>link to [article->art342]<BR>link to [article->article 342]<BR></TT></HTML>A particular use: <HTML><TT>[->art342]</TT></HTML> (no text before the "arrow") will automaticallydisplay the title of article 342 with a link to that article.<NEW> -* Link to section 12:}<HTML><TT><BR>link to [section->rub12]<BR>link to [section->rubrique 12]</tt></html>-* препратка до новина 65:}<HTML><TT><BR>препратка до [новина->br65]<BR>препратка до [новина->breve 65]<BR>препратка до [новина->brève 65]<BR></tt></html><NEW> -* Authors, keywords, sites, im ages, documents:}<HTML><TT><BR>link to [an author->aut13] or [the same author->auteur13]<BR>link to [a keyword->mot32]<BR>link to [a syndicated site->site1]<BR>link to [an attached document->doc17] or [the same document->document17]<BR>link to [an image->img13] or [the same image->image13]<BR></tt></html><NEW> Specific application: here too, we can put nothing before the "arrow"(<html><tt>[->aut13]</tt></html>...).SPIP will insert automatically the required information. In the case of an attached document or an image, if we manually entered a title, this title will be displayed ; otherwise, the file name itself is used.<NEW> <div align='right'><a href='#glossaire'>learn more: links to a glossary</a></div><NEW> You can also very quickly, create a hypertext link to the definition of an expression in an external glossary. For a given expression, you just have to insert the shortcut <code>[?expression]</code> in your text. That way, you can enrich your text with references without having to enter a web address!<NEW> So the following code:"<code>{Mansfield Park} is a major work by [?Jane Austen]</code>".displays thus:"{Mansfield Park} is a major work by [?Jane Austen]".By clicking on the link, you can verify that the expression you entered (a name or a noun) is correctly spelled and that it directs you to a valid destination.<NEW> The default glossary is [Wikipedia->http://www.wikipedia.org]. It is a multilingual encyclopaedia created co-operatively and opened to all contributors over the internet.Please take the time to acquaint yourself with it, to respect it and to contribute to it in order to enrich this shared fund of knowledge.<NEW> - {{Footnotes}}<NEW> A footnote is usually indicated by a number inserted in the text then repeated at the bottom of the page and offering additional information.<NEW> In SPIP, this feature (pretty awkward to manage manually in HTML) is automated: the footnotes are numbered by SPIP which also manages the hypertext links inside the document to jump directly from the number to the corresponding footnote and vice versa.<NEW> In SPIP, a footnote is placed between double brackets: «<HTML><TT> A[[Here is additional information.]] footnote.</TT></HTML>» will be displayed as: «A[[Here is additional information.]] footnote.»<NEW> <div align='right'><a href='#notes'>learn more: non-automated footnotes</a></div><NEW> - {{Quoting an excerpt (from the forum)}}<NEW> It is often practical, in a discussion forum, to quote an excerpt from the message whichwe are replying to. To make the presentation of such quotes consistent, SPIP offers the shortcut<html><tt><quote>...</quote></tt></html>.<NEW> For example:<cadre><quote>Pretty good that SPIP.</quote>Right you are, rubber duck :-)</cadre>gives:<quote><quote>Pretty good that SPIP.</quote>Right you are, rubber duck :-)</quote><NEW> {{{More complete features}}}<NEW> The following shortcuts providemore advanced functionalities, intended for a more specific use.If this is your first experience with the shortcuts of SPIP, it is probably uselessto try and memorize them at this stage. You only need to now they exist; onceyou really need them, come back to this page, it will then be much easierfor you to memorize shortcuts that you really need.<NEW> - {{Tables}}<NEW> To create simple tables in SPIP, you just have to create lines with «cells» separated by the symbol «|» ({vertical line}), making sure that the lines start and end with vertical lines. It is imperative to leave blank lines before and after this table.<NEW> For example, the table:<NEW> | {{Surname}} | {{Forename}} | {{Age}} || Smith | John | 23 years || Captain | | not known || Bloggs | Philip | 46 years || Cadoc | Baby | 4 months |<NEW> is coded thus:<NEW> <cadre>| {{Surname}} | {{Forename}} | {{Age}} |<BR>| Smith | John | 23 years |<BR>| Captain | | not known |<BR>| Bloggs | Philip | 46 years |<BR>| Cadoc | Baby | 4 months |<BR></cadre><NEW> Note that all the entries of the first row appear in bold. SPIP identifies, thus,that it is the row containing the columns headings and applies to it a presentation different from the other rows (differentbackground colour). The presence of such a row is not mandatory.<NEW> <a name='lists'></a>- {{Advanced management of lists and enumerations}}<NEW> - A sipmle carriage return can be performed by typing <tt>_</tt>(the underscore symbol) at the beginning of the line, followed by a blank space.<NEW> {N.B.} In traditional typography, use of a "new line" by itself is very rare (restricted, more or less, to poetry). It is often confused with a new paragraph as found in printed documents (with no additional vertical spacing between the paragraphs). Web browsers however, by default, insert a vertical spacing between paragraphs. Many users try to emulate the look of the printed page (no additional vertical spacing) by typing a simple line feed between what they consider to be paragraphs. This is an error which can make their site more difficult to maintain and develop. The correct solution is to define a stylesheet (CSS) in one's templates which describes the layout behaviour of paragraphs (i.e. whether or not there is an additional vertical space between paragraphs, the amount of indentation of the first line, etc.).<NEW> - You can create nested lists byadding asterisks after the list dash.For example:<cadre>-* Your horse is:-** chestnut;-** bay;-** black;-* but my rabbit is-** white:-*** angora-*** or short-haired.</cadre>gives:<quote>-* Your horse is:-** chestnut;-** bay;-** black;-* but my rabbit is-** white:-*** angora-*** or short-haired.</quote><NEW> - Lastly, ordered list can be made using the following symbol <code>#</code>instead of the star:<cadre>-# first-# second-# third</cadre>returns:<quote>-# first-# second-# third</quote><NEW> <a name='glossaire'>- {{Hyperlinks to an external glossary}}<NEW> You can also very quickly create a hyperlinkto a definition in an external glossary.For any given term, you simply insert thisshortcut in your text <code>[?term]</code>.<NEW> So the following code:"<code>{Frankenstein} is the masterpiece of [?Mary Shelley]</code>."will show on the screen:"{Frankenstein} is the masterpiece of [?Mary Shelley]."Remember to click the link in order to check that the term which has been entered(whether a name or common noun) is spelt correctlyand links to a valid destination.<NEW> The default external glossary is[Wikipedia->http://www.wikipedia.org].It is a multilingual encyclopaedia created co-operativelyand opened to all contributors overthe internet. Please take the time to acquaint yourselfwith it, to respect it and to contribute to it in order to enrich thisshared fund of knowledge.<a name='notes'></a>- {{Неавтоматични бележки}}<NEW> In most cases, the aforementionned systemof automatic footnotes is fairly enough.However, you maymanage the footnotes in a non automatic fashion by "imposing"the choice of the number or even the displayed text used to craft the link.<NEW> The general principle is that you put the clickable text between angle brackets at the beginning of the note, thus:<cadre>The text is annotated[[<xxx> This is the note.]]</cadre><NEW> Following this principle, you can:- use automatically numbered notes[[By placing the text of the note between double square brackets.]], or- force the number of the note[[<23> By putting the number between angle brackets: < and >]], or- use asterisks to indicate a note[[<*> By putting an asterisk between the angle brackets < and >]], or- add notes without any visible link to/from the main text. You do this by[[<> Putting angle brackets <> with nothing between them.]], or- give an abbreviation or name as the link to the note; in some languages this is often used for references indicating authorship of quotations[[<Rab> François Rabelais.]], or- add a link to an existing note[[<23>]] by placing the number of the note between angle brackets, < and >, and giving no text to the note.</cadre><NEW> returns:<quote>You may use footnotes numbered automatically [[By putting the text of the footnote between square brackets.]],- but you may also impose the numbering of the footnote [[<23> By indicating its number between the characters «<» and «>».]],- or use the footnotes in the form of a star [[<*> By putting a star between the charecters «<» and «>».]],- craft unreferenced footnotes (without any number); bear in mind however, that these footnotes don't bear any more a link between the footnote and the spot where it is inserted[[<> By putting nothing between the characters «<» and «>».]],- or give a name (fully spelled) to the footnote; this is frequently used for bibliographic references[[<Sha> William Shakespear.]];- point to an existing note[[<23>]] by indicating its number between the characters «<» and «>». and leaving the rest of the note empty.</quote>- {{Избягване на командите за ускорен достъп на СПИП}}<NEW> In some cases, it can be useful to tell SPIPthat some parts of a document should not be «processed» by the typographical shortcuts filter:you do not want to correct the typography or you want to display source code (e.g. in PHP, JavaScript...).<NEW> The code of this shortcut is: «<HTML><TT><HTML>Warning; text to leave as is</HTML></TT></HTML>», which gives: «<HTML>Warning; text to leave as is</HTML>».<NEW> For example, the present article is typed under SPIP and it displays the source code of SPIP's shortcuts; if we had not used this code, the shortcuts would have been interpreted and you would not be able to read there source code here!- {{Показване на програмния код}}Някои потребители биха желали в даден случай да бъде показан програмния код на тези страници.За тази цел е налице командата да ускорен достъп <HTML><TT><code>...</code></tt></html>.<NEW> Example: <HTML><TT><code><?php //this is some php code<br>echo "hello";<br>?></code></TT></HTML> gives <code><?php //this is some php codeecho "hello";?></code><NEW> There is another shortcut to display extract from programming code on several lines:<html><tt><cadre>...</cadre></tt></html>.This will put the code in a "form" (It is often usedin the present page). The advantage of this method is to make it easier to copy-paste fromyou web page: you just have to move the cursor to the code you wish to copy, to choose "select all"to be able to directly copy the code. Furthermore, in many browsers, this frame (cadre) allows abetter rendering of the tabs at the beginning of the lines.Here is an example:<cadre>class Text {vartype = 'text';vartext;}class Field{vartype = 'field';varfield_name,field_id;varcond_before,cond_after; // table of objectsvarfunctions;}</cadre>-------<NEW> </raccourcis><NEW> <rubhier><NEW> {{{Hierarchical structure of the sections}}}Структурата на рубриките представлява рамката на сайта Ви; тя определя интерфейса, начина на работа с него, взаимоотношенията между статиите и новините и т.н.<NEW> In SPIP, this structure is of the {hierarchical} type: a section can contain sub-sections which can contain other sub-sections themselves, and so on.<NEW> <CENTER><IMG SRC="AIDE/rubhier-1.gif" BORDER=0 ></CENTER><NEW> In the above example, we clearly see that section~222 relates to section~22, which itself relates to section~2 which does not relate to any other section (in this case, we say that section~2 is {in the site root}.<NEW> {By hierarchical structure we mean that a section is a child of only one other section (and not of several) and that a section cannot be the child of one of its own sub-sections (which means that SPIP does not allow circular structures). This very classical structure was adopted because of its ease of use.}<NEW> {{Only administrators can create, modify or delete sections.}}<NEW> </rubhier><NEW> <rubsyn><NEW> {{{Syndicated sites}}}<NEW> Sites developed by an automated publishing system (like SPIP or phpNuke) can easily create a file indicating always the list of their latest publications. In particular, there is standard format for this sort of file called «backend file».Файлът може лесно и автоматично да бъде анализиран, за да може постоянно да се следи списъка на последните новини от такива сайтове. По този начин СПИП дава възможност да се покаже, на собствения Ви сайт, списъка с най-скорошните статии, публикувано на други сайтове.<NEW> For each <a href="aide_index.php3?aide=reference" target="_top">referenced site</a> in your own sections, you have the possibility to fetch the list of the latest articles published on that site. That is, of course, if the referenced site offers a {backend} file.<NEW> - {{How to find the files «backend.php3»?}}<NEW> For sites managed under SPIP or phpNuke, those {backend} files are easy to locate: that is simply the file located in the site root and called «bakend.php3» (or «backend.php»). For example, concerning uZine (<TT>http://www.minirezo.net/</TT>), the backend file address is:<NEW> <LI><TT>http://www.minirezo.net/backend.php</TT><NEW> Other examples of backend files include:<NEW> <LI></HTML><TT>http://www.davduf.net/backend.php</TT></HTML></LI><LI></HTML><TT>http://www.vacarme.eu.org/backend.php</TT></HTML></LI><LI></HTML><TT>http://www.vakooler.com/backend.php</TT></HTML></LI><NEW> You should note that {<A HREF="http://rezo.net/backend" TARGET="autre">L'autre portail</A>} provides such files for the sites which it references, even if those sites do not have their own backend system. You will find on that page about thirty backend files for the sites referenced by {L'autre portail}, as well as a handful of theme files.<NEW> - {{Adding a syndicated site to your own site}}<NEW> When you reference a site in one of your sections, in addition to indicating the name of the site, its homepage URL and a description, you can choose to syndicate it (therefore, a syndicated site is primarily a referenced site from which we ask SPIP to fetch the list of the latest publications).<NEW> To achieve this, select the option «syndication» and enter the URL of the {backend} file of the desired site. Immediately after submitting, a message appears to tell whether the syndication has succeeded.<NEW> If the syndication fails:- make sure you entered the correct URL for that site;- make sure that the site you are trying to syndicate is actually accessible online.<NEW> - {{Quick referencing}}<NEW> The quick site referencing feature (enter directly the site's URL and SPIP will undertake the task of fetching the necessary information automatically) is very well suited to syndicated sites. Indeed, instead of entering the homepage URL during the referencing, you should enter the {backend} file URL of this site: SPIP will automatically fetch a big volume of information and proceeds directly with the syndication.<NEW> - {{Syndicated articles}}<NEW> When the syndication succeeds, SPIP displays the list of the latest articles published by that site. Look at the help page dedicated <a href="aide_index.php3?aide=artsyn" target="_top">to the management of those links</a>.<NEW> - {{The backend file of your own site}}<NEW> SPIP automatically creates the backend file of your own site. However, do not forget to set up the name and the URL of your site on the <A HREF="aide_index.php3?aide=confnom" TARGET="_top">Precise configuration</A> page.<NEW> </rubsyn><NEW> <rublogo><NEW> {{{Section's logo}}}<NEW> <A HREF="aide_index.php3?aide=logoart" TARGET="_top"><img src="AIDE/logoart-2.gif" alt=" " border="0" align="right"></A>You can install on your site a logo for each section. This logo could be unique (fixed image) or animated to manage mouse hovering.<NEW> The images installation for this section logo is exactly the same as the installation of the <A HREF="aide_index.php3?aide=logoart" TARGET="_top">article's logo</A>.<NEW> {{P.S.}} The section logos have a {recursive} behaviour: in case of a logo missing for a given section, SPIP will try to substitute it with the logo of a parent section:<NEW> <CENTER><IMG SRC="AIDE/rubhier-1.gif" BORDER=0 ></CENTER><NEW> In the above hierarchy, and in case of a missing logo for section~221, SPIP will substitute it (only for the visit of the public site) with the logo of section~22 or if the latter is also missing with the logo of section~2. Otherwise, SPIP will display the logo installed in the site root.<NEW> You should note also that, if the webmaster has programmed it that way, a section logo could be used as a substitution logo for the articles that this section contains.</rublogo><NEW> <rubrub><NEW> {{{Selecting the section}}}<NEW> The operation of this drop-down menu is very simple: the menu displays the whole section hierarchy (in the order in which the site administrators created them), you just have to select the one in which you want to place your sub-section.<NEW> - {{moving a section}}<NEW> <CENTER><img src="AIDE/rubrub.gif" border="0"></CENTER><NEW> Through this drop-down menu, you can transfer this section to being the child of another section. In this case, you must understand that the set of sub-sections contained in this section will «move» along with it in the hierarchy of the site. In the same way, the articles contained in this section and its sub-sections will move along with it.<NEW> </rubrub><NEW> <breves>{{{Новини}}}Новините са лесен и прост начин за публикуване в СПИП. За разлика от статиите, новините са малка по обем информация, съдържаща: заглавие, текст или хипертекстова препратка. Следователно, системата на новините е идеална за публикуване на текущи събития, преглед на пресата и др.<NEW> </breves><NEW> <brevesrub>{{{Местоположение на новините в структурата на сайта}}}С цел улесняване на използването им (и избягване на излишното повторение между новини и статии), включването на новини в подредбата на рубриките е ограничена до минимум: новините се отнасят само до рубрики, поместени в схемата на сайта.<NEW> <CENTER><img src="AIDE/rubhier-1.gif" alt="Sections" border="0"></CENTER>В нашия пример, ние можем да сложим новини в рубрики 1 и 2, но не и в техните под-рубрики (за разлика от статиите, които можем да публикуваме навсякъде). Следователно, страницата с новини се създава в по-горните секции, а падащото меню, което предлага да се определи положението на новините е много съкратено.<NEW> </brevesrub><NEW> <breveslien>{{{Хипертекстови препратки на новини}}}С цел улесняване използването на новините като част от електронния преглед на пресата, към всяка новина може да бъде добавена хипертекстова препратка. Вие трябва само да укажете името на свързания сайт или статия и тяхния уеб-адрес (URL).<NEW> Of course, this information is optional.{П.П.} Системата за препратки не предотвратява добавянето на хипертекстови препратки в основния текст на новината. {Отделната препратка}, обаче, позволява на администратора да прилага специални графически методи към нея.<NEW> </breveslien><NEW> <brevesstatut>{{{Статус на новината}}}Управлението на новини е по-лесно от това, на статии. Новините нямат автор. Техния статус е или "Изпратена" или "Одобрена", или "Отхвърлена". Само администраторите могат да променят техния статус.- {{Изпратена новина}}"Изпратените" новини са обозначени на страницата "Начало". Всички редактори могат да се консултират с тях и да ги променят. Администираторите са представени чрез два бутона, позволявайки тяхното одобрение или отхвърляне.- {{Одобрена новина}}"Одобрени" новини са тези, които се появяват на публичния сайт. След като бъдат веднъж публикувани, само администраторите могат да ги редактират.- {{Отхвърлена новина}}Една новина е "отхвърлена", когато не бъде публикувана на сайта като само администраторите могат да имат достъп до нея в личния сайт.<NEW> </brevesstatut><NEW> <breveslogo>{{{Лого на новината}}}<A HREF="aide_index.php3?aide=logoart" TARGET="_top"><img src="AIDE/logoart-2.gif" alt=" " border="0" align="right"></A>Можете да добавите лого към всяка новина от сайта. Логото може да бъде уникално (фиксирано изображение) или анимирано с цел да се управлява при локализиране на мишката върху него.Добавянето на изображения към логото на новините е напълно същото като добавянето на <A HREF="aide_index.php3?aide=logoart" TARGET="_top">лого на статия</A>.<NEW> </breveslogo><NEW> <suiviforum><NEW> {{{Forums follow-up}}}<NEW> The forums follow-up page is an important element of your site if you allow the use of public forums (on this matter, refer to the documentation about <A HREF="aide_index.php3?aide=confforums" TARGET="_top">public forums configuration</A>). It is here, in fact, that the forums moderation takes place.<NEW> - {{Messages display}}<NEW> Messages are not displayed here according to their hierarchical structure (by {threads}), but one after the other in a reverse chronological order (the most recent first). On the other hand, each message is accompanied by the name of the article it refers to.<NEW> - {{Deleting a message}}<NEW> The main feature here is the ability to {delete} contributions. {{Warning:}} this operation is irreversible. However, a deleted message is not removed from the database: it appears on this page surrounded by a red frame, accompanied by the date the message was received and the IP address of the sender.<NEW> - If you already configured public forums with the option of a{beforehand} moderation, messages in waiting areyellow framed and offer two buttons: {deletethis message} and {validate this message}.<NEW> </suiviforum><NEW> <cookie><NEW> {{{The administration cookie}}}<NEW> Administrators can activate a cookie which triggers the display of additional information during the visit of the public site.<NEW> - {{Refresh this page}}<NEW> A button labelled «Refresh this page» will appear on all the pages of the public site. Because SPIP integrates a {cache} system, some modifications may not appear immediately online. (Pages displayed on the public site are not directly pulled out from the database: they are refreshed at regular intervals and stored in the cache.)<NEW> By {refreshing} a page, the administrator instigates the display of the page according to the elements stored in the database, without the need to wait for the next refresh of the cache.<NEW> - {{Modifying...}}Страниците със статии, рубрики и новини съдържат бутон, наречен "Промяна на статията" (или "рубриката", "новината"). Този бутон води направо от публичния сайт към страницата в личната зона, отговаряща на съответната статия (рубрика или новина). Той улеснява поправката на грешки, открити при четене или актуализацията на някой от елементите на сайта.<NEW> - {{Number of visits}}<NEW> If the statistical system integrated to SPIP is enabled, the following information is added to the articles pages: number of visits (estimate) and number of different {referrers}.<NEW> Referrers are links to this particular article from outside the site (that is, when a site offers a direct link to this article, or when this article's address was passed by e-mail).<NEW> - {{Connection identifier}}<NEW> The administration cookie also enables SPIP to recognise your browser when you connect again: you then just have to enter your password to be able to get access to the private area.<NEW> (PS: if the connection is cookie dependant - it is the most common situation -, this cookie is placed in the private area as soon as you reach it.)<NEW> </cookie><NEW> <mots><NEW> {{{Keywords}}}<NEW> One of SPIP's most important restrictions is its hierarchical structure: each article can belong to only one section, which could sometimes cause classification problems.<NEW> Keywords offer a way of cross navigation inside the site. By associating one or more keywords to an article, we have at our disposal a way to create links to other articles with similar topics but located in other sections.<NEW> Keywords do not offer much benefit unless each one is associated with several articles, in order to be able to link these different articles to each others.<NEW> {Only the administrators can create and modify keywords.}<NEW> {Frequently, the sections structure, if it is well built, can do without keywords: articles with the same topic are simply located in the same section, it is, therefore, pointless to add those keywords to indicate the topic of each one. Administrators can then, totally disable the use of keywords in the <A HREF="aide_index.php3?aide=confart" TARGET="_top">Precise configuration</A> page.<NEW> </mots><NEW> <motsgroupes><NEW> {{{Keywords groups}}}<NEW> When you use a lot of keywords, it becomes awkward to manage them efficiently. That is why you can create groups containing those keywords. The interface then, becomes neater (for instance, a «Countries» group could contain «Namibia», «Germany», «Peru» while a «Topics» group contains «Unemployment», «Poetry», «Animals»...).<NEW> </motsgroupes><NEW> <messut><NEW> {{{Messages between users}}}<NEW> SPIP makes it easy to exchange messages between users of the site, without going through e-mails.<NEW> When a message is «sent» by a user to one or several other users, it turns into a private discussion forum. That way, once a message is sent, a discussion can take place, in the shape of a forum located under this message. With SPIP, we can consider that a message is also a private forum (that is, there is no point in exchanging a large amount of messages to hold a discussion, you simply «remain» in the same message with your correspondent to "chat", thanks to the private forum associated with him).<NEW> {Note:} Messages between users and their associated forums are private, this means that SPIP does not offer any interface for the administrators to see those messages. However, bear in mind that this confidentiality is very relative: a site administrator armed with a direct access tool to the database, can always check these messages.<NEW> - {{Creating a message/discussion}}<NEW> The simplest way to send a message is to click on the green logo (a small «M» followed by a triangle) displayed next to the recipient name. This will immediately opens a new message.<NEW> The second way is to use the button labelled «New Message» which appears on every page in SPIP. This will open a new message without recipient. Before sending the message, you should, of course, specify the recipient.<NEW> The editing interface of these messages is very straightforward.<NEW> The only common error to avoid is to forget to «send» this message: as long as the message has the status «Editing in progress», only its author can have access to it. It should then be sent in order for the recipients to see it (warning: once a message has been sent, it cannot be modified anymore).<NEW> - {{Adding/removing a recipient}}<NEW> At any moment in time, it is possible to add a recipient: either during the editing of the message or after it was sent (for instance, to add a new participant to a discussion in a forum which is interesting to him).<NEW> In the same way, you can remove a participant at any moment. Besides, a button labelled «Stop participation to this discussion» allows any participant to remove himself from a discussion.<NEW> - {{Making a appointment}}<NEW> Any message can be turned into a appointment: this means that it is linked to a date displayed in SPIP's calendar.<NEW> - {{Can we write to any user of the site?}}<NEW> Some editors could be unreachable (they do not show in the list «Add a participant» and their name is not accompanied by a messaging logo):- editors could decide individually, not to use the internal messaging system;- editors who did not connect to the private area for more than 15 days are unreachable (for these users who seldom connect, it is preferable to use ordinary e-mails).<NEW> </messut><NEW> <messpense><NEW> {{{Memos}}}<NEW> A memo («memorandum» or «memory juggler») is shaped like a message: but it does not require any recipient. Only its author can have access to it.<NEW> It is clear from its name that the memo aims at recording elements we would like to preserve.<NEW> - {{Inserting a memo in the calendar}}<NEW> The most practical use of the memo is to give it a date. That way, the memo acts as a reminder to its author until that date (and during the following 24 hours) and it appears in SPIP's calendar.<NEW> {Note:} As with messages between users, we attract your attention to the relative confidentiality of these memos. SPIP does not offer any interface for the administrators to see your messages. However, other direct access tools to the database, are capable of doing it.<NEW> </messpense><NEW> <messcalen><NEW> {{{The calendar}}}<NEW> SPIP's calendar offers two types of information:- {{обща за целия сайт информация;}} това са публикуваните статии и новини. По този начин календарът позволява връщане във времето на статиите, според тяхната дата на публикация в интернет;<NEW> - {{private information;}} these are the messages between users and the memos endowed with an appointment date. This calendar then, can act as a reminder and a diary.<NEW> You should note that each calendar day is accompanied by a small blue logo: this logo allows the creation of a memo directly associated to that date (the time of the appointment can be adjusted more precisely thanks to the editing interface of this memo).<NEW> </messcalen><NEW> <messconf><NEW> {{{Messaging customisation}}}<NEW> Each user can customise the configuration of internal messaging.<NEW> {Note:} Site administrators can decide not to use the messaging system or the list of connected users. Anyway, if an option is disabled globally for the whole site (by an administrator), editors cannot have access to it.<NEW> - {{Do not use internal messaging}}<NEW> If internal messaging is available for the whole site (option reserved for administrators), each user can take an individual decision not to use it (That is, he simply does not wish to exchange messages with other users through this system).<NEW> - {{Do not use the list of connected users}}<NEW> When this feature is available (by the administrators choice), and while he is using internal messaging, an editor can take an individual decision not to participate to the list of connected users.<NEW> This feature continuously displays the list of connected users in real time, which makes it easy for users to take part in quick discussions. Some users may find this feature intrusive and/or may not wish to be «disturbed» when they connect. They just have to disable this option: they will not appear on the list of connected editors anymore, and this list will no longer show on their pages.<NEW> {Note:} When an administrator indicates that he does not wish to appear on the list of connected editors, the list still shows: he «sees» the others, but the others do not «see» him.<NEW> </messconf><NEW> <reference><NEW> {{{Referenced sites}}}<NEW> SPIP offers a complete management system for lists of links to other sites. This system is very comprehensive and offers particularly:- grouping of these lists in sections (same sections containing articles or specific sections dedicated to this use, in the same way as a links directory);- associating a logo with each site;- associating keywords with each referenced site;- adding a customised description to each site.<NEW> Furthermore, and for the sites that permit it, you can automatically fetch the latest articles published (refer to «<a href="aide_index.php3?aide=rubsyn" target="_top">Syndicated sites</a>»).<NEW> {{Referencing a new site}}<NEW> A button labelled «Reference a new site» in every section page in your site allows you to add a new site.<NEW> The «traditional» way is to indicate the site's name and its URL, then to insert a description. It is also possible to select the section of your site in which this referencing is to be inserted.<NEW> A box at the bottom of the page allows you to manage any possible syndication of the content. For more details on this matter refer to the explanation of <a href="aide_index.php3?aide=rubsyn "target="_top">syndicated sites</a>. For a straightforward referencing, you just select the option «no syndication».<NEW> {{Quick referencing}}<NEW> During the creation of a new site referencing, a box appears at the top of the page to offer you a quick referencing of a site without the need to enter its name or description. For this, you just have to enter the URL of the page you wish to reference and to submit. As far as possible, SPIP will go to this address and try to automatically fetch the page title and a description. You can modify this information at a later time.<NEW> {{Who can suggest referenced sites?}}<NEW> In the «Precise configuration» page, administrators can specify that only administrators have the possibility to suggest sites, or the editors or even the site visitors (in the last case, a form on the public site will give the visitors the opportunity to suggest sites).<NEW> Anyway, only the administrators can validate these referencing suggestions. When a site referencing is suggested, all the participants to the private area can discuss the relevance of the suggestion in a forum linked to each site.<NEW> </reference><NEW> <artsyn><NEW> {{{Syndicated articles}}}<NEW> When you request a <A HREF="aide_index.php3?aide=rubsyn" TARGET="_top">site syndication</A>, SPIP displays a list of the latest articles published on this site, under the label «Syndicated articles pulled out from this site».<NEW> For each article, SPIP displays:- the article's title (you just click on this title to access the article on its original site);- the article's authors, should there be any;- the article's description, should there be one.<NEW> This information, pulled automatically out of the referenced site, cannot be modified.<NEW> Furthermore, for each article, a button labelled «block this link» allows you to block its display on your own site (because the article does not suit you or there is an error disabling this link...). You can restore the display of this article on your site at any time.<NEW> It is also possible to request that each future link coming from the site should be blocked beforehand. The articles pulled out will not be displayed unless you validate each one of them «manually».<NEW> </artsyn><NEW> <confhttpproxy><NEW> {{{Using a HTTP proxy}}}<NEW> If your site is behind a firewall, you could find that you have to configure a HTTP proxy to be able to fetch the new syndicated sites over the internet.<NEW> This proxy should allow outgoing requests without any authentication.<NEW> In your site configuration (in the section labelled «SPIP features»), enter the proxy in the following format:<NEW> <code>http://proxyname:port/</code><NEW> where {proxyname} is the name of the server acting as a proxy, and {port} is the number of the TCP port (most frequently 3128, 8080, or even 80) which will handle the requests.<NEW> Warning: This set-up is global: SPIP will fetch all the syndicated sites through this proxy. If you need more precise settings, you must contact your network administrator.</confhttpproxy><deconnect>{{{ИЗХОД}}}За да откажете идентификацията си в личната зона, можете да натиснете бутона "Изход". При натискането на този бутон, информацията за идентифициране, която вече сте попълнили ще бъде "изчистена" от сисемата; след това, попълнете отново информацията или се върнете към публичния сайт.{Основната полза от това свойство е да се спре друг човек, който използва същата машина, да има достъп до личната зона и да се възползва от Вашата идентификация.}- {{Работите сам(а) и сте единственият(та), който има достъп до компютъра}}В този случай, може да изглежда, че изходът с това свойство е нещо безсмислено. Въпреки това, ние Ви препоръчваме да излизате, макар че и да забравите не е голяма беда.- {{Получавате достъп до личната зона от многопотребителска машина}}В този случай, горещо Ви препоръчваме да изключвате от системата периодично след като свършите работата си, посредством това свойство. По този начин ще избегнете напълно всякакъв достъп до личната зона на друг човек освен Вас, който използва същата машина.- {{Използване на няколко потребителски имена за достъп до сайта}}Някои потребители биха желали да получават достъп до личната зона чрез повече от едно потребителско име. В този случай, те могат да използват свойството "изход", за да излязат и да влязат повторно с новата си самоличност.</deconnect><spip></spip>